Item number M485-AD16DA12-I
2 x analog input for strain gauge 4-wire, 1 x excitation OUT 0 - + 10VDC, 1 x Di and 4 x Do, RS485 bus. 10 - 30VDC.
RS485 module with 2-channel strain gauge gauge
high resolution: 16-bit
excitation voltage range: 0 ~ +10 V.
50 Hz Event counter (digital input)
high / low alarm (Digital Output)
Linear Map Function
3000 VDC Intra Module Isolation
Double Watchdog
Temperature Area: -25 to + 75 ° C
Supply Voltage: 10 - 30vdc
Dim: 123 x 76 x 35 mm
356.17 €
Excl. VAT
Quantity
Physically in stock
Specifications
| Forsyning | 10 - 30 VDC, 2,2 W via klemrække |
|---|---|
| Indgangsimpedans | 2 MΩ |
| Isolation | 3000 VDC |
| Maks. hastighed | 10 pr. sek. |
| Opløsning | 16 bit, ±0,05 % præcision |
| Stabilitet | Nulpunktsdrift: ±0,6 µV/°C Drift af følsomhed: ±25 ppm/°C |
| Udgange | 4 stk. “Open collector”: 30 VDC, 30 mA12 bit: 0-10 V 0,05 % af FS Drift af følsomhed: ±50 ppm/°C |
I det industrielle miljø er der mange eksempler, hvor kraft skal konverteres til et målbart elektrisk output.
I de fleste tilfælde kan en strain gauge måler på en vejecelle anvendes. Men spørgsmålet er, hvordan håndterer vi så disse elektriske outputmålinger?
I denne situation er dette modul bestemt det bedste valg.
Ikke kun kan modulet behandle data fra en vejecelle eller en belastningsmåler, det har også lineær kortlægning, der kan bruges til direkte at konvertere de resulterende data til vægt via en brugerdefineret korrespondenttabel.
Modulet understøtter spændingsmålere med fuld bro og giver 2 analoge indgangskanaler, 1 excitationsspændingsudgangskanal, 1 digitale indgangskanaler og 4 digitale udgangskanaler.
Modulet har et programmerbart inputområde (± 15 mV, ± 50 mV, ± 100 mV, ± 500 mV, ± 1 V og ± 2,5 V), og hver analog indgangskanal kan konfigureres individuelt. Excitationsspændingsoutput kan være i området 0 ~ +10 V med en strøm på 40 mA. Digitale udgangskanaler kan også indstilles som høje eller lave alarmudgange.DCON-protokoller, som kan konfigureres via software er standard.
Other products in the same category:
3 x temperature measurement with PT100, PT1000 sensor and nine RTD elements, 16bit resolution, RS485 bus. 10 - 30vdc.
Module for PT100 or PT1000 sensor with 4-, 3- or 2-wire
for nickel temperature sensor (Ni RTD)
16 bit resolution
15 Measurements per second (Total)
Supply voltage: 10 - 30vdc / 1 Watt
Master RS485 must establish bias voltage
Dim: 123 x 72 x 35 mm
378.95 €
Item number:M485-ADRTD3-I
Logic Controller with Data Logger. 1 x RJ45 Ethernet, 1 x RS232, 1 x RS485. Supports XV plug-in I/O board, 12 - 48VDC
The logger / controller with socket for internal I / O expansion bus (eg. Relay module)
is programmed with simple logic functions
IF-THEN-ELSE, AND and OR simplifies the setup
supports SNMP, SMTP , FTP, Modbus RTU and DCON
Ethernet 10/100 / 1000Mbit
setup via the integrated Web server
1 x RS232 ports
1 x RS485 ports
Supply voltage: 12 - 48VDC
712.21 €
Item number:L-CON-LOG
CAN bus repeater. Amplifier and restores correct pulse shape. Up to 800kbps. Opto-isolated. DIN bracket.
CAN Bus Booster
CAN specification 2.0A and 2.0B
ISO 11898-2 standard
Max. Baudrate: 800 Kbps
Jumper for 120Ω Terminal resistance on the CAN bus
2 CAN channels
Automatic Baud Rate
Up to 100 nodes on each CAN port
Removable terminal block
DIN bracket
Supply: 10 - 30vdc
Call +45 56 66 20 20 for price
Item number:M485-CAN-I+
Network Module with Digital I / O Korenix Jeti / O 6550
Network module with digital I / O Korenix JETI / O 6550
Channels: 14/8
Digital inputs: 14 pcs., Logic 0: 0 - 4 V, Logic 1: 5 - 30V
Digital outputs: & nbsp; 8 pcs. Open collector, 5 - 40 V 250mA
Isolation: Optical 2500 VRMS for analog and digital inputs and outputs for the power supply
Magnetic 1500 V from the network interface for the power supply
10/100 Mbit m / RJ45 their connector
Operating temperature: - 25 ° C - 70 ° C
Supports Modbus / TCP, OPC server, SNMP. Software included for configuration
For DIN rail mounting
Supply: 10 - 30 VDC via terminal block, Max 1.92 W
186.80 €
Item number:ETHIO14D8D-K
Programmable Industrial Controller with 8 Digital inputs and 4 Relay outputs
ARM Cortex - A53 CPU , 1.2 GHz
RAM 1Gb SDRAM
16GB of memory
2 x RS232/422/485
8 x DI and 4 x relay outputs
DC input 9-32V
4G module
OS : Linux Raspbian
User need knowledge of linux and programing
Documentation for DI/O and 4G module
766.88 €
Item number:RPI-4G-8I4O
HMI 4.3" Controller Panel with touch, RS485 bus, MODBUS RTU, GUI design, C and Ladder. RTC. 12 - 48VDC
4.3" HMI Control panel for I/O modules
LCD color display with touch
Free HMIWorks development tool
Library for useful applications
MODBUS
RS485 serial port
Supply voltage: 12 - 48VDC, 2.5W
Dimensions: 126 x 92 x 29 mm
Wall mounted in wall back piece 86 x 86 mm
Operating temperature: -20 - +50°C
299.89 €
Item number:HMI4.3"SER-I
Industrial controller for measuring and controlling the processes. With ethernet and 4G, with data logging, MQTT, IoT
Advanced Controller with logging
With slot for internal I/O expansion module, A/D, D/A, D/I, D/O, relay
Program with simple logic functions - WISE (Web Inside Smart Engine)
Logic functions with IF-THEN-ELSE logic
Supports SNMP, SMTP, FTP, MQTT, Modbus / TCP / RTU and DCON
Ethernet 10/100 / 1000Mbit
Setup via the built-in Web server
1 x RS232 port
2 x RS485 port
Supply voltage: 12 - 48VDC
1,188.98 €
Item number:L-CON-LOG+4G









