Relay

Relay

A relay is an electrically operated switch. It consists of a set of input terminals for a single or multiple control signals and a set of operating contact terminals. Relays are used where needed by control and circuits at and independent low power signal, or where multiple circuits must be controlled by one signal. For example, if you Have a door you want to unlock for every gang man doing something, use a relay. You can choose whether the relay should be normally open (disconnected) or normally closed (user contact). This is very typical of a relay is NC (normally closed), as something must be done to disconnect the relay switch.

Relay
There are 10 products.
Auto switching relay 24V - Relay Mini Make / Break Twin Terminal 40 amp 24 volt

Auto switch relay for ignition 24 V
Incl. cable

15.28 €
Item numberAUTO-REL24
Physically in stock
8 Relay outputs + 16 optoisulated digital inputs Inlog Micro PI-426

Spare part

Each Channels Can be software programmed to be input or output
Software routines provided Easily Link to High Level Programs
Switch Selectable Interrupt Level (IRQ2 ... IRQ7)
Presentable de-bounce time in interrupt fashion
10k pull-up resistor for each channel

inlog pi-426

255.40 €
Item numberREL8OPT16
Physically in stock
8 x Power Relay 5A with Ethernet Daisy chain and Modbus

Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
Good communication security
2 x RJ45 Daisy Chain, only data is continued Further to Dual Watchdog
Operating temperature range: - 25 ~ + 75 ° C
I / O Pair Connection - Input Mirrors to another's output 
8 x Power relay - electromechanical, COM NO 
Rel becoming: On: 10ms, Off: 5ms
Relay Contact voltage and current: 24VDC / 250VAC / 5A
Electromechanical: Avoid inductive load
supply voltage: POE or 12 - 48VDC

421.83 €
Item numberETHIO8PR-P2I
On the way in
12 x Power Relay Module to 30VDC 5A 250VAC 5A, RS485 bus, MODBUS / RTU / DCON

12 channel power relay output module
RS485 to MODBUS
Communicates via MODBUS RTU
Operating temperature -25 ° -75 ° C
4 kV EFT protection
3 kV Surge Protection
for wall or DIN rail mounting

275.37 €
Item numberMOD485-R12-I
On the way in
Relæ til styring op til 230 VACforRelay

250 VAC klæberelæ til DIN skinne

78.66 €
Item numberDIN-RELAY-L
Physically in stock
Info kommer snarestforRelay

Slutte/bryde

71.29 €
Item numberDIN-RELAY-S
On the way in
Cabinet Thermostat 0 to 60°C, 230VAC DIN mounting close contact NO function

Thermostat 0 to 60°C
Snap-Action switch
Dimensions 60 x 33 x 43
Max. starting current AC 10
Max. switching capacity NC: 10 A resistive / 2 A inductive @ AC 250 V
(Special specifiction are welcome)

23.99 €
Item numberREL-TEMP-NO
Physically in stock
Cabinet Thermostat for DIN rail mount 0 → +60 °C, NC normally Closed, 120Vac 230Vac Temprature control

Compact design
Wide adjustment range
DIN Rail mountable 35mm 
Thermostat 0 to 60 °C
Snap-Action Contact
Housing plastic, UL 94V-0, light gray
Max. inrush current AC 16 A for 10 seconds
Max. switching capacity NC: 10 A resistive / 2 A inductive @ AC 250 V, NO: 5A resistive / 2A inductive@250V 15A resistive/2A inductive@AC120V DC30W(DC24-72V)
IP20
Dimensions 60 x 33 x 43

23.99 €
Item numberREL-TEMP-NC
Physically in stock
Relay Output Card 8-Channel 6A TTL Control

8 relay outputs

Relay switches up to 6A DC

Relay max voltage: 60V

Relay response time: 10ms

Relay life: 100000 cycles

One-way switches, 2-pin terminals

TTL output signals

Galvanic isolation of channels

8 LEDs for input/output state

Screw-clamp connections

25-pin D-Sub male connector

USB-PIO compatible

DIN rail mounting (ZU-EW optional)

Humidity: 0-90% non-condensing

CE: EN61000-6-1, EN61000-6-3

RoHS and WEEE compliant

Power: +5V DC, max 3.5W

0..70C operating temp

160mm x 100mm x 20mm


CAN BE USED WITH USB-DIO24

86.70 €
Item numberTERM25R8
Physically in stock
Showing 1-10 of 10 item(s)