Input

Input

Input
There are 14 products.
RS485 Module: 8 Isolated Inputs & Display for Precision Control

8 isolated digital inputs with 16 bit counter
RS485 interface
-25°C ~ +75°C
Display
YOUR shine
Screw terminal

170.45 €
Item numberM485-DI8D-I
Physically in stock
ICPDAS I-7065 Relay box with 5 x relay closing contact - 4 x digital inputs. RS485 bus

RS485 I/O module with 4 digital inputs and 5 relay outputs

4 x Digital input (wet) active with voltage in

Digital input as 16 bit counter - 100Hz

5 x Relay output - COM, NO

Supply: 10 - 30VDC

YOUR

162.01 €
Item numberM485-REL5-I
Physically in stock
ICPDAS I-7058 is a module with 8 digital inputs. Both for DC and AC volt. RS485.

RS485 Module - Slave, with digital input
8 x digital inputs for DC and AC
Voltage monitoring
input voltage: 80 - 250VAC / DC
Supply: 10 -30vdc

155.57 €
Item numberM485-DI8AC-I
Physically in stock
Opto-Isolated Digital I/O Module: 4 Inputs, 8 Outputs, RS485

8 digital outputs and 4 digital inputs
Open Collector Output
Photocouple Isolation
Digital input channels can be used as 16-bit counters
Configurable Power-on Value settings
Configurable settings for sure value
3750 Vrms insulation voltage
Dual Watchdog
Wide operating temperature range: -25 to + 75 ° C

171.12 €
Item numberM485-DIO4-I
Physically in stock
7 digitale indgange og 8 digitale udgange, displayforInput

RS485 module with digital I / O
7 digital input
8 digital output, 30volt / 30mA
RS485 interface
Baudrate 1200 ~ 115200 bps
Dual Watchdog
10 - 30 VDC, 1 W via terminal block
-25- + 75 °
DIN rail mounting

140.03 €
Item numberM485-DIO7D-I
Physically in stock
ICP DAS I-7024R-G is a 4 x analog output module, 0 - +/- 10V and 0 - 20mA, 14bit. 5 x digital input with DRY - Contact

RS485 module with volt / mA output. Digital input
4 x analog output - 0 - +/- 10V and 0-20mA
Resolution: 14bit
5 x Digital input - Active high on contact for frame
RS485 Bus - Module is Slave
Format: (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate: 1200 ~ 115200 bps
Supply: 10 ~ 30 VDC

415.27 €
Item numberM485-DA4DI5-1
Physically in stock
ICP DAS I-7052 module with 8 optoisulated digital inputs. 6 is balanced and 2 with a common gnd.

RS485 Slave module with 8 digital inputs
6 pcs. Balanced
2 pcs. With joint GND.
Sink and Source Inputs
16 Bit Counter
RS485 Bus
Supply voltage: 10 - 30VDC
Dim: 123 x 72 x 35 mm

180.23 €
Item numberM485-DI8-I
Physically in stock
ICP DAS I-7083 Module with 3 axis encoder module, quadrant count CW, CCW. 32 bits count. 1 MHz.

RS485 module with 3-axpet Encoder input
1MHz Frequency input
input voltage: Up to 5VDC
Other voltages are with external resistance
32 bit counter
Quadrant, Pulse / Dir, CW and CCW
RS485 port - 1200 - 115.2K Baud
Supply voltage: 10 - 30VDC
Dim: 123 x 72 x 35 mm

275.24 €
Item numberM485-COUNT-Q-I
On the way in
Digital IO via Ethernet og internetforVia Network

Distributed I/O via Ethernet/RS485
Can be controlled via RS485 or Ethernet
10 x digital in 10 x relay out (mechanical relay)
9VDC ~ 24VDC supply voltage (power adapter included)
16bit / 100MHz CPU
256 KB ROM, 1 MB SDRAM

320.80 €
Item numberETHIO-R10I10
On the way in
Showing 1-14 of 14 item(s)