Item number CHANN-RTD-INPUT-MODUL

8-Channel RTD Input Module for CANopen, 16-bit, DIN-Rail

8-channel RTD input, 2/3-wire
Pt100/1000, Ni120, Cu100/1000, JPt100
16-bit resolution, +/-0.05% FSR
CANopen CiA301/401 protocol
Baud rate 10kbps - 1Mbps
Isolation 3000VDC / 3000Vrms
Open wire detection
Built-in 120 ohm terminal resistor
DIN-rail mounting, 1.5W consumption
Dimensions: 33 x 99 x 78 mm
-25~75C (special components required)
Storage -30~80C, 10-90% RH

414.06 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple3000 V DC-DC, 3000 Vrms photo-coupler
Operating Temperature -25 ~ +75 °C
Resolution 16-bit
Terminal Resistor Built-in 120Ω
Watchdog Timer Hardware watchdog
Status 3 LEDs to PWR, RUN and ERR
Consumption 1.5 W
Dimensions (mm) 33 x 99 x 78 ( W x L x H )
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Channels 8 channels for 2-wire or 3-wire RTD
Accuracy +/-0.05% FSR
Sampling Rate 10 Samples/Sec. (Total)
Input Impedance 20 MΩ
Overvoltage Protection 120 VDC / 110 VAC
Zero Drift +/- 0.5 μV/ °C
Span Drift +/- 20 ppm/ °C
Baud Rate 10 k ~ 1 M
Sensor Type Pt100, Pt1000, Ni120, Cu100, Cu1000, JPt100
Common Mode Rejection 150 dB
Normal Mode Rejection 100 dB
Individual Channel Configuration Yes
Protocol CiA 301 v4.02, CiA 401 v2.1
Open Wire Detection Yes
Node ID 1 ~ 99
No. of PDOs 10 RxPDO , 10 TxPDO
Error Control Node Guarding protocol / Heartbeat Producer
NMT Slave
EMCY Message Yes
PDO Mode Event-triggered, remotely-requested, Cyclic and acyclic SYNC

CANopen RTD Input Module

This CANopen RTD Input Module is designed for precise temperature monitoring in industrial CAN bus networks. It supports up to eight RTD channels and integrates seamlessly into distributed control systems using the CANopen protocol.


8 RTD Channels · 16-bit Resolution · CANopen CiA301/401 · 3000V Isolation


Key Features for Reliable Temperature Measurement

  • 8 RTD Channels - supports 2-wire and 3-wire RTD sensors
  • Wide Sensor Compatibility - works with Pt100, Pt1000, Ni120, Cu100, Cu1000 and JPt100
  • High Accuracy - 16-bit resolution with +/-0.05% FSR accuracy
  • Strong Isolation - 3000VDC DC-to-DC and 3000Vrms photo-coupler isolation
  • Open Wire Detection - detects broken sensor wiring for reliable operation


Typical Applications

The module is suitable for industrial environments where accurate and isolated temperature readings are required over a CAN bus network.

  • Process monitoring in factories
  • Building automation systems
  • Machine condition monitoring
  • Distributed temperature sensing in harsh environments


A robust and precise choice for CANopen-based temperature monitoring in demanding industrial applications.