Item number CAN-SINGL-MODE-FIBER-2

CAN to Single-Mode Fiber Optic Converter, 15km, 10-30VDC DIN-Rail

1 x CAN port, ISO 11898-2, 2.0A/B
Baud rate 10kbps - 1Mbps
Single-mode fiber, SC connector
100 Base-FX, 15km distance
Wavelength TX 1310nm, RX 1550nm
2500 Vrms isolation on CAN side
Switchable 120 Ohm terminal resistor
1 x RS-232 utility port
DIN-Rail mount, plastic casing
10-30VDC, 3W
-25 to 75C (special components required)
33.0 x 126 x 101 mm

326.96 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Isolation 2500 Vrms on the CAN side
Operating Temperature 25 ~ +75 °C
Terminal Resistor Switch for 120Ω terminal resistor
Status 1 x Power3 x CAN status2 x Fiber status
Ports 1Single-Mode; SC connector x 1; 100 Base-FX1 x RS-232 (Utility Port)
Input Range +10 VDC ~ +30 VDC
Consumption 3 W
Dimensions (mm) 33.0 x 126 x 101 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Specification ISO 11898-2, CAN 2.0A and CAN 2.0B
Baud Rate 10 k ~ 1 M bps
Casing Plastic
RX Sensitivity 31 dBm Max.
Filter Yes
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Wavelength TX: 1310, RX: 1550 nm
TX Output 14 dBm Min. , -8 dBm Max.
RX Overload 5 dBm Max.
Budget 17 dBm
Transmission Distance 15 km (9/125 μm recommended)
Propagation Delay 190 us (*Note2)

Fiber Optics Converter Module

This is a fiber optics converter module that converts CAN signals for single-mode fiber optic transmission. It is used to extend and isolate CAN networks in industrial environments requiring noise immunity and long-distance connectivity.


ISO 11898-2 CAN · Single-mode fiber, 15 km · 2500 Vrms isolation · DIN-Rail mounting


Features and benefits

  • Galvanic isolation -2500 Vrms isolation protects the CAN side from noise and voltage differences
  • Long transmission distance -up to 15 km via single-mode fiber
  • Flexible baud rate -supports 10 kbps to 1 Mbps
  • Built-in termination -switchable 120 Ohm terminal resistor simplifies installation
  • Rugged operation -wide operating temperature range and DIN-Rail mounting for industrial use


Applications

The module suits industrial automation tasks where CAN-based systems need to be connected over long distances or in electrically noisy environments.

  • Industrial automation
  • Transportation and railway systems
  • Power and utility installations
  • Machine control with long cable runs


A reliable solution for connecting CAN networks over long distances with full galvanic isolation.