Fiber Media Converters

Fiber Media Converters

These media converters translate signals from CAN, CAN FD and RS-232/422/485 into fiber optics. They are used when a cabinet or plant needs to be connected over long distances or through areas with heavy electrical noise. Fiber avoids ground loops and interference from motors and frequency drives. The converters are typically mounted on a DIN rail inside a cabinet.

The key choice is whether the fiber is multimode or single-mode. Single-mode covers the longest distances and is often used for 15, 25 or 30 kilometres. Multimode is cheaper and covers shorter runs up to a few kilometres. Also choose based on the signal type to be converted, whether the connector is ST or SC, and what supply voltage the unit requires.

Fiber Media Converters
There are 9 products.
Fiber Optic Converter Module, CAN FD to Single-Mode Fiber, 30km, DIN-Rail

CAN FD to fiber optic converter
ISO 11898-2, CAN 2.0 A/B and FD
Single-mode fiber 9/125um
Transmission distance 30 km
Wavelength 1310 nm
CAN bit rate 10k - 1Mbps
CAN FD data rate 100k - 10Mbps
Switchable 120 Ohm terminal resistor
1 x USB Type B Mini-B, USB 2.0
DIN-Rail mounting, plastic casing
10-30VDC, 3W
-25 to 75C (special components required)

348.40 €
Item numberFIBER-OPTIC-CONVE-MODUL
On the way in
CAN to Single-Mode Fiber Optic Converter, 15km, 10-30VDC DIN-Rail

1 x CAN port, ISO 11898-2, 2.0A/B
Baud rate 10kbps - 1Mbps
Single-mode fiber, SC connector
100 Base-FX, 15km distance
Wavelength TX 1310nm, RX 1550nm
2500 Vrms isolation on CAN side
Switchable 120 Ohm terminal resistor
1 x RS-232 utility port
DIN-Rail mount, plastic casing
10-30VDC, 3W
-25 to 75C (special components required)
33.0 x 126 x 101 mm

326.96 €
Item numberCAN-SINGL-MODE-FIBER-2
On the way in
CAN to Single-Mode Fiber Optic Converter, 15km, 10-30VDC DIN-Rail

1 x CAN port, ISO 11898-2, CAN 2.0A/B
Baud rate 10k - 1Mbps
1 x Single-Mode fiber, SC, 100Base-FX
Wavelength TX 1550 / RX 1310 nm
Transmission distance 15 km
2500 Vrms isolation on CAN side
Switchable 120 Ohm terminal resistor
1 x RS-232 utility port
DIN-Rail mount, plastic casing
10-30VDC, 3W
33.0 x 126 x 101 mm
-25 to +75C (special components required)

326.96 €
Item numberCAN-SINGL-MODE-FIBER-3
On the way in
CAN to Fiber Optic Converter, Multi Mode ST, DIN-Rail

1 x CAN port, ISO-11898-2, 2.0A/B
Baud rate 10k - 1M bps
1 x Fiber port, Multi Mode ST connector
Fiber cable 50/125, 62.5/125 or 100/140um
Wavelength 850nm, up to 2km distance
1 x RS-232 utility port
Isolation 3000VDC / 2500Vrms
Switchable 120 Ohm terminal resistor
DIN-Rail mount, plastic casing
10-30VDC, 3W
-40 to 75C (special components required)
32.3 x 77.5 x 99.0 mm

314.90 €
Item numberCAN-FIBER-OPTIC-CONVE-2
On the way in
CAN to Fiber Converter, Multi Mode ST, 1-Port CAN, DIN-Rail

1 x CAN port, ISO-11898-2
CAN 2.0A and CAN 2.0B
Baud rate 10k - 1Mbps
1 x Multi Mode fiber, ST connector
Wavelength 850 nm
Distance up to 2 km
Isolation 3000VDC / 2500Vrms
Switchable 120 Ohm terminal resistor
1 x RS-232 utility port
DIN-Rail plastic casing
10-30VDC, 3W
32.3 x 77.5 x 99.0 mm
-25 to 75C (special components required)

294.80 €
Item numberCAN-FIBER-CONVE-MULTI
On the way in
RS-232/422/485 to Single-Mode Fiber Converter, SC, 25km

Serial to fiber optic converter
1 x RS-232/422/485 port
Single-Mode fiber, SC connector
Baud rate 1200 - 115200 bps
Wavelength TX 1310 / RX 1550 nm
Transmission distance 25 km
ESD protection IEC 61000-4-2
DIN-Rail mounting, plastic casing
10-95% RH non-condensing
+10 - +30VDC, 2W
33 x 89 x 107 mm

309.54 €
Item numberRS-232-422-485-5
On the way in
RS-232/422/485 to Single-Mode Fiber Converter, SC, 25km

Serial RS-232/422/485 to fiber
Single-Mode, SC connector x1
Baud rate 1200-115200 bps
TX 1550nm / RX 1310nm
Transmission distance 25 km
ESD protection IEC 61000-4-2
DIN-Rail mounting, plastic casing
10-95% RH non-condensing
+10 to +30VDC, 2W
33 x 89 x 107 mm

309.54 €
Item numberRS-232-422-485-7
On the way in
CAN FD to Fiber Optic Converter, Multi-Mode ST Duplex, 2km

CAN 2.0 A/B and CAN FD ISO 11898-2
Multi-Mode ST Duplex, 100 Base-FX
Transmission distance up to 2 km
Wavelength 1310 nm
CAN FD data rate 100k - 10Mbps
3000VDC / 2500Vrms isolation
Switchable 120 Ohm terminal resistor
DIN-Rail mount, plastic casing
10-90% RH non-condensing
+10 - +30VDC, 3W
33 x 127 x 101 mm
-25 to +75C (special components required)

353.76 €
Item numberCAN-FD-FIBER-OPTIC
On the way in
CAN to Fiber Optic Converter, Single-Mode SC Duplex 100Base-FX, 60km

1 x CAN port, ISO 11898-2, CAN 2.0A/B
Baud rate 10k - 1M bps
Single-mode SC Duplex, 100Base-FX
Wavelength 1310 nm
Transmission distance up to 60 km
2500 Vrms isolation on CAN side
Switchable 120 Ohm terminal resistor
1 x RS-232 utility port
DIN-rail mount, plastic casing
10-30VDC, 3W consumption
-25 to +75 C (special components required)
33 x 126 x 101 mm

387.26 €
Item numberCAN-FIBER-OPTIC-CONVE
On the way in
Showing 1-9 of 9 item(s)