Item number FIBER-OPTIC-CONVE-MODUL

Fiber Optic Converter Module, CAN FD to Single-Mode Fiber, 30km, DIN-Rail

CAN FD to fiber optic converter
ISO 11898-2, CAN 2.0 A/B and FD
Single-mode fiber 9/125um
Transmission distance 30 km
Wavelength 1310 nm
CAN bit rate 10k - 1Mbps
CAN FD data rate 100k - 10Mbps
Switchable 120 Ohm terminal resistor
1 x USB Type B Mini-B, USB 2.0
DIN-Rail mounting, plastic casing
10-30VDC, 3W
-25 to 75C (special components required)

348.40 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Connector USB Type B, Mini-B
Driver Built-in Windows 7/8.1/10
Operating Temperature 25 ~ +75 °C
Terminal Resistor Switch for 120Ω terminal resistor
Status 1 x Power, 3 x CAN status, 2 x Fiber status
Ports 1
Input Range +10 VDC ~ +30 VDC
Consumption 3 W
Dimensions (mm) 33 x 127 x 101 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Specification ISO 11898-2, CAN 2.0 A/B and FDUSB 2.0 High Speed (480Mbps)
Baud Rate CAN bit rates: 10 k ~ 1 M bps,CAN FD bit rates for data field: 100 k ~ 10M bps (*Note2)
Casing Plastic
RX Sensitivity 34 dBm Max.
Filter Yes
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Wavelength 1310 nm
TX Output 15 dBm Min. , -8 dBm Max.
RX Overload 5 dBm Max.
Budget 19 dBm
Transmission Distance 30 km (9/125 μm recommended)
Propagation Delay 190 us (*Note1)

Fiber Optics Converter Module

This fiber optics converter module converts CAN and CAN FD signals for fiber optic transmission, allowing industrial networks to span long distances with high noise immunity. The module is well suited for industrial environments requiring galvanic isolation and reliable data transfer.


CAN 2.0 A/B and CAN FD · 30 km transmission · DIN-Rail mounting · -25 to +75°C


Features and Capabilities

  • CAN FD support - handles bit rates up to 10 Mbps for the data field
  • Long transmission distance - up to 30 km via single-mode fiber
  • Switchable termination - built-in 120 Ohm terminal resistor
  • USB configuration - USB 2.0 High Speed with built-in Windows driver
  • Rugged design - DIN-Rail mounting and wide operating temperature range


Application Areas

The module suits industrial applications where CAN networks need to be extended over long distances or electrically isolated.

  • Industrial automation
  • Long-distance machine control
  • Electrical isolation of CAN segments
  • Transportation and infrastructure projects


A reliable solution for safely carrying CAN and CAN FD communication over long distances via fiber optics.