Item number CAN-FIBER-OPTIC-CONVE

CAN to Fiber Optic Converter, Single-Mode SC Duplex 100Base-FX, 60km

1 x CAN port, ISO 11898-2, CAN 2.0A/B
Baud rate 10k - 1M bps
Single-mode SC Duplex, 100Base-FX
Wavelength 1310 nm
Transmission distance up to 60 km
2500 Vrms isolation on CAN side
Switchable 120 Ohm terminal resistor
1 x RS-232 utility port
DIN-rail mount, plastic casing
10-30VDC, 3W consumption
-25 to +75 C (special components required)
33 x 126 x 101 mm

387.26 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Isolation 2500 Vrms on the CAN side
Operating Temperature 25 ~ +75 °C
Terminal Resistor Switch for 120Ω terminal resistor
Status 1 x Power3 x CAN status2 x Fiber status
Ports 1Single-Mode; SC Duplex connector x 1; 100 Base-FX1 x RS-232 (Utility Port)
Input Range +10 VDC ~ +30 VDC
Consumption 3 W
Dimensions (mm) 33 x 126 x 101 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Specification ISO 11898-2, CAN 2.0A and CAN 2.0B
Baud Rate 10 k ~ 1 M bps
Casing Plastic
RX Sensitivity 35 dBm Max.
Filter Yes
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Wavelength 1310 nm
TX Output 5 dBm Min. , 0 dBm Max.
RX Overload 5 dBm Max.
Budget 30 dBm
Transmission Distance 60 km (9/125 μm recommended)
Propagation Delay 190 us (*Note1)

Fiber Optics Converter Module

This fiber optics converter module converts CAN signals to single-mode fiber optics, allowing CAN-based networks to be extended over long distances with high noise immunity. The module is designed for industrial environments where reliable long-distance data transmission is essential.


CAN 2.0A/B · Single-Mode SC Duplex · Up to 60 km · 2500 Vrms Isolation


Features that ensure stable operation

  • Galvanic isolation -2500 Vrms isolation protects the CAN side from noise and transients
  • Long transmission distance -up to 60 km via single-mode fiber
  • Flexible baud rate -supports 10 k to 1 M bps
  • Built-in termination -switchable 120 Ohm terminal resistor
  • Rugged design -DIN-rail mounting and wide operating temperature range


Applications

The module is well suited for industrial applications where CAN networks need to be extended over long distances or through electrically noisy environments.

  • Industrial automation
  • Transportation and railway systems
  • Power and utility installations
  • Machine control with distributed CAN nodes


The ideal solution for reliably extending CAN networks over long distances using fiber optics.