Item number CAN-FD-FIBER-OPTIC

CAN FD to Fiber Optic Converter, Multi-Mode ST Duplex, 2km

CAN 2.0 A/B and CAN FD ISO 11898-2
Multi-Mode ST Duplex, 100 Base-FX
Transmission distance up to 2 km
Wavelength 1310 nm
CAN FD data rate 100k - 10Mbps
3000VDC / 2500Vrms isolation
Switchable 120 Ohm terminal resistor
DIN-Rail mount, plastic casing
10-90% RH non-condensing
+10 - +30VDC, 3W
33 x 127 x 101 mm
-25 to +75C (special components required)

353.76 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photocoupler
Operating Temperature 25 ~ +75 °C
Terminal Resistor Switch for 120Ω terminal resistor
Status 1 x Power3 x CAN status2 x Fiber status
Ports 1Multi-Mode; ST Duplex connector x 1; 100 Base-FX
Input Range +10 VDC ~ +30 VDC
Consumption 3 W
Dimensions (mm) 33 x 127 x 101 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Specification ISO 11898-2, CAN 2.0 A/B and FD
Baud Rate CAN bit rates: 10 k ~ 1 M bps,CAN FD bit rates for data field: 100 k ~ 10M bps (*Note2)
Casing Plastic
RX Sensitivity 32 dBm Max.
Filter Yes
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Wavelength 1310 nm
TX Output 20 dBm Min. , -14 dBm Max.
RX Overload 8 dBm Max.
Budget 12 dBm
Transmission Distance 2 km (62.5/125 μm recommended)
Propagation Delay 190 us (*Note1)

Fiber Optics Converter Module

This Fiber Optics Converter Module converts CAN and CAN FD signals to multi-mode fiber optics, enabling reliable data transmission over long distances and in electrically noisy industrial environments. The module is ideal for isolated communication between CAN nodes where galvanic separation and extended range are required.


CAN 2.0 A/B and CAN FD · Multi-Mode ST Duplex · 2 km transmission · 3000VDC isolation


Features and Benefits

  • CAN FD support -handles data field bit rates up to 10 Mbps
  • Galvanic isolation -3000VDC DC-to-DC and 2500 Vrms photocoupler protect against noise
  • Fiber optic transmission -up to 2 km range free from electrical interference
  • Switchable terminal resistor -built-in 120 Ohm resistor simplifies installation
  • Rugged DIN-Rail design -plastic casing for easy cabinet mounting


Applications

The module suits industrial networks where CAN based systems need to be connected over longer distances or in environments with heavy electrical noise.

  • Industrial automation
  • Transportation and railway systems
  • Maritime and offshore installations
  • Distributed CAN networks


The reliable solution for isolated CAN communication over fiber optics in demanding industrial environments.