There are 181 products.
Remote control and data logging of Server rooms, industrial installation. Digital, analog, relay, CAN bus.

Industrial and IT room monitor unit
1 x RJ45 Ethernet 10/100 Mbps
USB port For USB camera
USB memory for logging, max. 64GB SD
Built-in USB hub
4 x Analog ports for sensors (can be expanded)
2 x Digital input (dry contact)
1 x CAM port (max. 10 sensors, can be expanded)
2 x Relay output
Desktop, Wall, (Option: DIN and 19" brackets as extensions)
Dimensions: 150 x 140 x 28 mm

Call +45 56 66 20 20 for price
Item numberREMOTE-MON-LOG325
On the way in
RS485 Single-Mode Fiber Receiver Module - 1-Channel Duplex, 20km Range

Single-Mode Fiber (Multi-Mode optional)
1-Channel Duplex Rs485
Point-to-Point or Daisy-Chain (M485-FIBER-ST is needed)
DC input 5V (< 3W)
Operating tempeture: -45 C~+75 C
Up to to 115.2Kbps data rate

307.80 €
Item numberM485-FIBER-SR
On the way in
RS485 Single-Mode Fiber Receiver Module - 1-Channel Duplex, 20km Range

Single-Mode Fiber (Multi-Mode optional)
1-Channel Duplex Rs485
Point-to-Point or Daisy-Chain (M485-FIBER-SR is needed)
DC input 5V (< 3W)
Operating tempeture: -45 C~+75 C
Up to to 115.2Kbps data rate

307.80 €
Item numberM485-FIBER-ST
On the way in
M-BUS master up to 20 devices for MODBUS RS485 slave. PLC/PC with MODBUS master

Protocol converter from M-BUS devices to PC/PLC which is Modbus Master
Up to 20 M-BUS units (meters)
RS485 Modbus interface for Modbus master
Free setup software
Supply voltage: 18 - 35VDC, 15 - 21VAC
Max. power consumption: 4 Watt
Baud rate: 1200 - 115,200 baud
Galvanic isolation
Temperature: -40 - +70°C
Dimensions: 71 x 60 x 60 mm

555.83 €
Item numberM485-MBUSM-MODBUSS
Physically in stock
Pt1000 transmitter -50 - +300°C for 2 wire and 3 wire Pt1000 sensor, 4-20mA

Thermal resistance current transmission module for Pt1000
Power supply: 16 - 36VDC (two-wire loop power supply)
Output: 4 - 20mA
Connect I+ and GND I- to A/D input.
If A/D input is 0-10V, connect 125ohm across input
It will give 0-10V across the 125ohm resistor
For 2 - 3 lead platinum resistance PT1000 temperature sensor
Additional Pt1000 temperature sensor
Accuracy: 0.2% FS Related to the accuracy level of the connected platinum resistor
Dimensions: see drawings

38.73 €
Item numberDC-TEMP-MA-PT1000
Physically in stock
L-CON Controller with 16 x Digital inputs, For dry contact, 1 x RJ45 Ethernet, Modbus/TCP
Intelligent Controller with Web Server
Logical functions, such as: IF-THEN-ELSE
No programming. Just choose, click and done.
Supports: I/O module, counter, timer, email
Modbus/TCP protocol for SCADA software seamless integration
IEEE 802.3af Compliant Power over Ethernet (PoE)
1 x RJ45 - 10/100Mbit Ethernet
16 x Digital input: Dry: contact input
D/I counter: 16bit, 50Hz
Supply voltage: PoE or 12 - 48VDC / 4.5Watt
290.51 €
Item numberL-CON16DD-I
Physically in stock
7" HMI touch, modbus, RS232/485 WIN CE7.0, ICP DAS VP-2201-CE7
Cortex-A8, 1 GHz CPU
7" TFT LCD with Touch
Front panel: NEMA 4/IP65 
Windows CE 7.0
512 MB SDRAM and 256 MB Flash
16 KB EEPROM128 KB MRAM for data retention
1 x microSD socket with one microSD card
1 x 10/100/1000BASE-T Ethernet Port
2 x Serial Ports (RS-232/485)
2 x USB 2.0 (host)
Built-In Real-time clock
2 x LED Indicators
Audio with Earphone-out
Built-In dual Watchdog Timer
Panel mounting, VESA Mounting (75 mm x 75 mm) 
IP65 Compliant Front Panel
213 x 148 x 44 (W x L x H) 
Operating Temperature: -10 ~ +60 °C
 +12 ~ 48 VDC , 6W, POE 
Call +45 56 66 20 20 for price
Item numberHMI7-WINCE7.0
On the way in
PROFINET to Modbus Master Converter with Triple Isolation,

PROFINET to Modbus Master Converter

4kV isolation between PROFINET and Modbus

Vibration and shock resistant metal housing

Operating temperature: -40°C to 105°C

1x RS485 up to 115200 bps for RS485

1x Ethernet ports 10/100 Base-T Autosensing

DIN rail mountable

Power input: 10-40VDC, 8-26VAC

Configuration via software

Dimensions: 76mm x 86mm x 40mm

Weight: 250g

Call +45 56 66 20 20 for price
Item numberCNV-PROFI-MODBUS
On the way in
Addressable RS-485 to 3 x RS232/RS485 converter with 1 x DI, 10 - 30VDC

Includes firmware for "Addressable RS-485 to RS-232 converter"

Supports Dual-Watchdog commands

Supports startup value and safe value for DO

Supports real-time monitoring/control for the built-in DI/DO

Includes a 1KB queue buffer for each RS-232 interface

Low power consumption

Supply: +10 - +30VDC

256.88 €
Item numberM485-ADR-CNTROL
On the way in
MODBUS RTU 2 Master units share 1 Slave unit

Supports 2 different Baud Rates on port 1 and port 2

3 x RS485 ports

Supports Modbus RTU/ASCII protocol

Supports 2 Master devices sharing 1 slave port

Data cache for each master port

RAW data mode for most request-response protocols

Built-in web server for easy configuration (HTTP)

Redundant Power Input: POE (IEEE 802.3AF, Class 1) and DC Jack

Allows automatic RS-485 management control

Tiny Form-Factor and Low Power Consumption

Read cache ensures faster response

157.45 €
Item numberM485-2M-1S
Physically in stock
2 x RS232 splitter and converter to RS485/422, Raw data, Modbus RTU/ASCII, 2 Master to Slave

Supports 2 different Baud Rates on port 1 and port 2

2 x RS232 1 x RS485 ports

Supports Modbus RTU/ASCII protocol

Supports 2 Master devices sharing 1 slave port

Data cache for each master port

RAW data mode for most request-response protocols

Built-in web server for easy configuration (HTTP)

Redundant Power Input: POE (IEEE 802.3AF, Class 1) and DC Jack

Allows automatic RS-485 management control

Tiny Form-Factor and Low Power Consumption

Read cache ensures faster response

153.43 €
Item numberRS232-2M-1S-485
On the way in
1 channel 2-Way digital I/O over Single Mode or Multi Mode Fiber cable

1 channel 2-way over fiber cable

Supplied as a set

500 meters@MM

100 km@SM

Input: Normally open

Output: Relay - normally open

Relay switch: 5VDC/5A, 30VDC/1A, 240VAC/0.25A

Status LED

Fiber connector: ST

I/O connections: Screw terminals

Supply voltage: 5VDC

Power consumption: 3W

Operating temperature: -20 - +75°C

Dimensions: 104 x 104 x 28 mm


300.16 €
Item numberFIBERIO1D-RT
On the way in
2-channel 2-Way digital I/O over Single Mode or Multi Mode Fiber Cable

2 channel 2-way over fiber cable

Supplied as a set

500 meters@MM

100 km@SM

Input: Normally open

Output: Relay - normally open

Relay switch: 5VDC/5A, 30VDC/1A, 240VAC/0.25A

Status LED

Fiber connector: ST

I/O connections: Screw terminals

Supply voltage: 5VDC

Power consumption: 3W

Operating temperature: -20 - +75°C

Dimensions: 104 x 104 x 28 mm

604.07 €
Item numberFIBERIO2D-RT
On the way in
1-Way Digital I/O over Single Mode or Multi Mode Fiber Cable

1 channel 1-way over fiber cable

Supplied as a set

500 meters@MM

100 km@SM

Input: Normally open

Output: Relay - normally open

Relay switch: 5VDC/5A, 30VDC/1A, 240VAC/0.25A

Status LED

Fiber connector: ST

I/O connections: Screw terminals

Supply voltage: 5VDC

Power consumption: 3W

Operating temperature: -20 - +75°C

Dimensions: 104 x 104 x 28 mm

168.84 €
Item numberFIBERIO1-RT
On the way in
2 Channel 1-Way Digital I/O over Single Mode or Multi Mode Fiber Cable

2 channels 1-way over fiber cable

Supplied as a set

500 meters@MM

100 km@SM

Input: Normally open

Output: Relay - normally open

Relay switch: 5VDC/5A, 30VDC/1A, 240VAC/0.25A

Status LED

Fiber connector: ST

I/O connections: Screw terminals

Supply voltage: 5VDC

Power consumption: 3W

Operating temperature: -20 - +75°C

Dimensions: 104 x 104 x 28 mm

300.16 €
Item numberFIBERIO2-RT
On the way in
4 Channels 1-Way Digital I/O over Single Mode or Multi Mode Fiber Cable

4 channel 1-way over fiber cable

Supplied as a set

500 meters@MM

100 km@SM

Input: Normally open

Output: Relay - normally open

Relay switch: 5VDC/5A, 30VDC/1A, 240VAC/0.25A

Status LED

Fiber connector: ST

I/O connections: Screw terminals

Supply voltage: 5VDC

Power consumption: 3W

Operating temperature: -20 - +75°C

Dimensions: 104 x 104 x 28 mm

526.62 €
Item numberFIBERIO4-RT
On the way in
8 Channel 1-Way Digital I/O over Single Mode or Multi Mode Fiber Cable

8 channel 1-way over fiber cable

Supplied as a set

500 meters@MM

100 km@SM

Input: Normally open

Output: Relay - normally open

Relay switch: 5VDC/5A, 30VDC/1A, 240VAC/0.25A

Status LED

Fiber connector: ST

I/O connections: Screw terminals

Supply voltage: 5VDC

Power consumption: 3W

Operating temperature: -20 - +75°C

Dimensions: 104 x 104 x 28 mm

712.88 €
Item numberFIBERIO8-RT
On the way in
4 channels of 2-Way Digital I/O over Single Mode or Multi Mode Fiber Cable

4 channels 2-way over fiber cable

Supplied as a set

500 meters@MM

100 km@SM

Input: Normally open

Output: Relay - normally open

Relay switch: 5VDC/5A, 30VDC/1A, 240VAC/0.25A

Status LED

Fiber connector: ST

I/O connections: Screw terminals

Supply voltage: 5VDC

Power consumption: 3W

Operating temperature: -20 - +75°C

Dimensions: 167 x 114 x 28 mm

819.81 €
Item numberFIBERIO4D-RT
On the way in
Showing 161-180 of 181 item(s)