Item number PROGR-DEVIC-SERVE-RS-5

Programmable Device Server with RS-232/422/485 to Ethernet, 4 DI / 4 DO

Serial to Ethernet device server
10/100 Base-TX RJ-45 port
1x RS-232, 1x RS-485, 1x RS-422/485
Baud rate up to 115200 bps
4 x Dry Contact Digital Input
4 x Open Collector Digital Output
Watchdog timer
Metal casing, wall mounting
10-30VDC power input
-25/+75C (special components required)
102 x 29 x 125 mm (W x L x H)

2,740.00 kr
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)1 x 5-wire RS-2321 x RS-4851 x RS-485/RS-422
Consumption 2.0 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Metal
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 10 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects serial equipment to Ethernet networks, enabling remote monitoring and control of industrial devices. It combines serial communication, digital I/O and network connectivity in a single compact unit.


10/100 Base-TX Ethernet · RS-232/422/485 · 4 Digital Inputs · 4 Digital Outputs


Key features and connectivity

  • Multi-protocol serial ports - supports RS-232, RS-485 and RS-422/485 for flexible device integration
  • Auto-negotiating Ethernet port - 10/100 Base-TX with auto MDI/MDI-X for easy network setup
  • Onboard digital I/O - 4 dry contact inputs and 4 open collector outputs for direct control tasks
  • Robust watchdog timer - ensures continuous, reliable operation in unattended installations
  • Wide operating temperature - rated from -25C to +75C for demanding industrial environments


Typical applications

The device server suits industrial environments where legacy serial equipment must be integrated into modern Ethernet networks.

  • Remote monitoring of factory equipment
  • Integration of serial sensors and PLCs into Ethernet networks
  • Building automation and control systems
  • Utility and infrastructure monitoring


A reliable choice for bridging serial devices to Ethernet in demanding industrial settings.