Item number ETHER-MODUL-8X-POWER

Ethernet I/O Module with 8x Power Relay Output, PoE

8 x Power Relay Output, Form A SPST N.O.
Contact Rating 5A @ 250VAC/24VDC
2 x RJ-45 10/100 Base-TX Switch Ports
LAN Bypass Function
Modbus TCP/UDP, MQTT, REST API, SNMP
Web Interface, IF-THEN-ELSE Logic
Timer and Schedule Operation
Powered via PoE IEEE 802.3af Class 2
12-48VDC Terminal Block Power Input
25 to +75C (special components required)
76 x 120 x 38 mm
DIN-Rail Mounting

330.98 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Power Relay, Form A (SPST N.O.)
Operating Temperature 25 to +75°C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 4.4 W (max.)
Dimensions (mm) 76 x 120 x 38 (W x L x H)
Storage Temperature 30 to +80°C
Humidity 10 to 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 8
Safe Value Programmable
Powered from Terminal Block +12 to +48 VDC
Power on Value Programmable
Protocol Modbus TCP, Modbus TCP/TLS, Modbus UDP, MQTT, Rest API, CoAP,LwM2M, SNMP, SMTP, SNTP, HTTP/HTTPS
Powered from PoE Yes, IEEE 802.3af, Class 2
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Operate Time 10 ms (max.)
Release Time 5 ms (max.)
Electrical Endurance 10^5 ops.
Mechanical Endurance 2 × 10^7 ops.
Function • Web Interface for Configuration• IF-THEN-ELSE Logic operation• I/O channel monitoring and control• Timer operation• Schedule operation• Internal Register operation
2-way Isolation Ethernet: 1500 VDCI/O: 3000 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
LAN bypass Yes
Access Control ID, Password and IP Filter

Ethernet I/O Module

This Ethernet I/O module is designed for remote control of relay outputs over the network. It is used in industrial automation tasks where reliable control of electrical loads is essential.


8 x Power Relay Output · PoE Support · Modbus TCP/UDP · DIN-Rail Mounting


Features that make the difference

  • Web-based configuration - easy setup without extra software
  • IF-THEN-ELSE logic - automated control without a PLC
  • LAN Bypass - ensures network connection during power loss
  • Wide protocol support - Modbus, MQTT, REST API and SNMP
  • PoE power supply - simplifies installation with a single cable


Application areas

The module is well suited for monitoring and control of equipment in industrial and building technology installations.

  • Remote control of pumps and motors
  • Automation of lighting systems
  • Monitoring of technical systems
  • Integration into SCADA systems


A robust and flexible choice for reliable relay control over Ethernet.