Item number ETHER-MODUL-DI-DO-4

Ethernet I/O Module 8 x DI 8 x DO, PoE, Modbus TCP/MQTT

8 x Digital Input (Dry/Wet Contact)
8 x Isolated Open Collector Output
Modbus TCP/UDP, MQTT, SNMP, HTTP(S)
2 x RJ45 10/100 Switch Ports, LAN Bypass
PoE IEEE 802.3af Class 2
Web Interface, IF-THEN-ELSE Logic
Timer and Schedule Operation
2-way Isolation Ethernet 1500VDC, I/O 2500VDC
Load Current 650mA/channel at 25C
12-48VDC
76 x 120 x 38 mm
25 to 75C (special components required)

363.14 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Isolated Open CollectorDry ContactWet Contact
Operating Temperature 25 to +75°C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 4.4 W (max.)
Dimensions (mm) 76 x 120 x 38 (W x L x H)
Storage Temperature 30 to +80°C
Humidity 10 to 90% RH, Non-condensing
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 8
Input Impedance 10 kΩ
Overvoltage Protection +47 VDC+70 VDC
Safe Value Programmable
Powered from Terminal Block +12 to +48 VDC
Sink/Source (NPN/PNP) Dry: SourceWet: Sink/SourceSource
ON Voltage Level Dry: Close to GNDWet: +10 to +50 VDC
OFF Voltage Level Dry: OpenWet: +4 VDC (max.)
Effective Distance 500m (max.)
Load Voltage +10 to +40 VDC
Load Current 650 mA/channel at 25°C
Power on Value Programmable
Protocol Modbus TCP, Modbus TCP/TLS, Modbus UDP, MQTT, Rest API, CoAP,LwM2M, SNMP, SMTP, SNTP, HTTP/HTTPS
Powered from PoE Yes, IEEE 802.3af, Class 2
Frequency 100 Hz
Function • Web Interface for Configuration• IF-THEN-ELSE Logic operation• I/O channel monitoring and control• Timer operation• Schedule operation• Internal Register operation
2-way Isolation Ethernet: 1500 VDCI/O: 2500 VDC
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 5 ms
LAN bypass Yes
Access Control ID, Password and IP Filter

Ethernet I/O Module

This Ethernet I/O module provides flexible monitoring and control of digital inputs and outputs over the network. It is well suited for industrial automation applications requiring reliable communication and remote I/O control.


8 x Digital Input · 8 x Isolated Output · PoE 802.3af · Modbus TCP/MQTT


Features that make the difference

  • Web configuration -easy setup without extra software
  • IF-THEN-ELSE logic -automates responses to I/O events
  • Timer and schedule operation -plan operation over time
  • 2-way isolation -protects against noise and voltage spikes
  • PoE power supply -reduces the need for separate cabling


Application areas

The module suits tasks where digital I/O must be monitored and controlled remotely via Ethernet.

  • Industrial automation
  • Building management
  • Remote equipment monitoring
  • SCADA and IoT integration


With robust isolation, PoE support and flexible protocols, this module is the right choice for demanding Ethernet I/O tasks.