Item number ETHER-MODUL-8X-ANALO-3

Ethernet I/O Module 8x Analog Input 4x Digital Output, PoE

8x Isolated Analog Input (Differential)
4x Isolated Digital Output, Open Collector
Voltage/Current Input, 16-bit Resolution
Load 700mA/channel, 5-50VDC
Modbus TCP/UDP, MQTT, REST API, SNMP
2x RJ45 10/100 Switch Ports, LAN Bypass
Web Interface Configuration
IF-THEN-ELSE Logic, Timer, Schedule
PoE IEEE 802.3af or 12-48VDC
72 x 120 x 38 mm
25 to +75C (special components required)

399.32 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
Type VoltageCurrentIsolated Open Collector
Operating Temperature 25 to +75°C
Resolution 16-bit
Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V±20 mA, 0 to 20 mA, 4 to 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 4.4 W (max.)
Dimensions (mm) 72 x 120 x 38 (W x L x H)
Storage Temperature 30 to +80°C
Humidity 10 to 90% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 48 (Differential)
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Hz (total channels)Fast Mode: 50 Hz (total channels)
Input Impedance Voltage: 2 MΩCurrent: 125 Ω
Overvoltage Protection +60 VDC240 Vrms
Safe Value Programmable
Powered from Terminal Block +12 to +48 VDC
Sink/Source (NPN/PNP) Sink
Load Voltage +5 to +50 VDC
Load Current 700 mA/Channel
Power on Value Programmable
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus TCP/TLS, Modbus UDP, MQTT, Rest API, CoAP,LwM2M, SNMP, SMTP, SNTP, HTTP/HTTPS
Open Wire Detection For 4 to 20 mA only
Powered from PoE Yes, IEEE 802.3af, Class 2
Common Voltage Protection ±200 VDC
Function • Web Interface for Configuration• IF-THEN-ELSE Logic operation• I/O channel monitoring and control• Timer operation• Schedule operation• Internal Register operation
2-way Isolation Ethernet: 1500 VDCI/O: 2500 VDC
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
LAN bypass Yes
Access Control ID, Password and IP Filter

Ethernet I/O Module

This Ethernet I/O module is designed for remote monitoring and control of analog and digital signals in industrial networks. It combines isolated analog inputs with digital outputs and supports a wide range of modern communication protocols. Ideal for automation, process monitoring, and data logging.


8x isolated analog input · 4x digital output · PoE powered · Modbus TCP/MQTT


Flexible features for industrial control

  • Web-based configuration -easy setup without additional software
  • IF-THEN-ELSE logic -automated actions based on I/O status
  • Timer and schedule function -plan operation as needed
  • Isolated channels -high protection against noise and overvoltage
  • LAN bypass -ensures network connection during power loss


Application areas

The module suits demanding industrial environments where reliable data acquisition and control are essential.

  • Process monitoring in production facilities
  • Remote control of pumps and valves
  • Building automation
  • Energy and environmental monitoring


A robust and versatile choice for reliable I/O control over Ethernet.