Item number ETHER-MODUL-AI-AO-2

Ethernet I/O Module 6 x AI, 2 x AO, 2 x DI, 2 x DO, PoE

6 x Analog Input, 16-bit, Voltage/Current
2 x Analog Output, 12-bit, Voltage/Current
2 x Digital Input, Dry/Wet Contact, Counter
2 x Isolated Open Collector Output
2 x RJ45 10/100 Base-TX Switch Ports, PoE
Modbus TCP, MQTT, REST API, SNMP, HTTP/HTTPS
Web Interface, IF-THEN-ELSE Logic, Scheduler
2-way Isolation Ethernet 1500VDC, I/O 2500VDC
DIN-Rail Mounting
12-48VDC or PoE IEEE 802.3af
76 x 120 x 38 mm
-25 to +75C (special components required)

448.90 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
Type VoltageCurrentIsolated Open CollectorDry ContactWet Contact
Operating Temperature 25 to +75°C
Resolution 16-bit12-bit
Range ±500 mV, ±1 V, ±5 V, ±10 V0 to 20 mA, ±20 mA, 4 to 20 mA(Jumper Selectable)+0 to +5 VDC, ±5 VDC, +0 to +10 VDC, ±10 VDC0 to 20 mA, 4 to 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 4.4 W (max.)
Dimensions (mm) 76 x 120 x 38 (W x L x H)
Storage Temperature 30 to +80°C
Humidity 10 to 90% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 6 (Differential)2
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5% or better±0.1% of FSR
Sampling Rate Normal Mode: 10 Hz (total channels)Fast Mode: 50 Hz (total channels)
Input Impedance Voltage: 2 MΩCurrent: 125 Ω
Overvoltage Protection +30 VDC240 Vrms+60 VDC
Voltage Output Capability 10 V @ 20 mA
Current Load Resistance 500 Ω
Power-on Value Programmable
Safe Value Programmable
Powered from Terminal Block +12 to +48 VDC
Sink/Source (NPN/PNP) Sink
ON Voltage Level Dry: Close to GNDWet: +1 VDC (max.)
OFF Voltage Level Dry: OpenWet: +3.5 to +30 VDC
Effective Distance 500m (max.)
Load Voltage +5 to +50 VDC
Load Current 700 mA/Channel
Power on Value Programmable
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus TCP/TLS, Modbus UDP, MQTT, Rest API, CoAP, LwM2M, SNMP, SMTP, SNTP, HTTP/HTTPS
Open Wire Detection For 4 to 20 mA only
Powered from PoE Yes, IEEE 802.3af, Class 2
Common Voltage Protection ±200 VDC
Frequency 100 Hz
Function • Web Interface for Configuration• IF-THEN-ELSE Logic operation• I/O channel monitoring and control• Timer operation• Schedule operation• Internal Register operation
2-way Isolation Ethernet: 1500 VDCI/O: 2500 VDC
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 5 ms
LAN bypass Yes
Access Control ID, Password and IP Filter

Ethernet I/O Module

This Ethernet I/O module provides flexible monitoring and control of analog and digital signals over the network. It is well suited for industrial automation applications where reliable data acquisition and remote control are essential. With built-in logic functions and a web interface, the device can be configured and operated directly from a browser.


6 x Analog Input · 2 x Analog Output · 2 x Digital I/O · PoE Supported


Features That Make the Difference

  • Web-based configuration - easy setup without extra software
  • IF-THEN-ELSE logic - automate processes directly on the module
  • High resolution - 16-bit analog inputs for precise measurements
  • Dual isolation - protects both Ethernet and I/O circuits
  • PoE power supply - reduces the need for a separate power cable


Application Areas

The module fits tasks where analog and digital signals need to be monitored and controlled remotely over Ethernet.

  • Process monitoring in industrial plants
  • Remote control of pumps and valves
  • Data acquisition from sensors
  • Building automation and SCADA integration


A robust and versatile choice for flexible I/O control over Ethernet.