Item number HART-FIBER-GATEW-RS

HART to Fiber Gateway, RS-232 Single Mode 100Base-FX SC

HART Gateway with fiber conversion
1 x HART port, 2-pin terminal block
RS-232 configuration port (1200,O,8,1)
SC Duplex, Single mode, 100Base-FX
Wavelength 1310 nm
TX Output 15 dBm min, -8 dBm max
RX Sensitivity 34 dBm max
Selectable 250 Ohm loop resistor
Isolation per UL1577
Reverse polarity and brown-out protection
10-90% RH non-condensing
10-30VDC, 33.0 x 126 x 101 mm

513.22 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Data Only Digital Data
Installation DIN-Rail
Isolation UL1577 Spec.
Operating Temperature 25 ~ +75 °C (-13 to 167ºF)
Status PWR, FB_Ack, FB_Err, HT_Err, HT_Tx and HT_Rx
Ports RS-232 (TXD / RXD / GND) for configuration (1200, O, 8 ,1)SC Duplex type ; Single mode ; 100 Base-FX1
Input Range Unregulated +10 ~ +30 VDC
Consumption 3W
Dimensions (mm) 33.0 x 126 x 101 (W x L x H)
Storage Temperature 30 ~ +80 °C (-22 to 176ºF)
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Power reverse polarity protection, Over-voltage brown-out protection
Protocol 2-pin screwed terminal block (HART+, HART-)
RX Sensitivity 34 dBm Max.
Loop Resistor Selectable 250 Ω loop resistor
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125
Wavelength 1310 nm
TX Output 15 dBm Min. -8 dBm Max.
RX Overload 5 dBm Max.
Budget 19 dBm

HART Gateway

This HART Gateway converts HART signals for fiber optic transmission and is used to connect HART instruments over long distances with high noise immunity. It is designed for industrial process plants where reliable data transfer is essential.


Single mode 100Base-FX · SC Duplex · 1310 nm · DIN-Rail mounting


Features that ensure stable operation

  • Fiber optic conversion - transmits HART data via single mode fiber over long distances
  • UL1577 isolation - protects against noise and ground potential differences
  • Reverse polarity protection - prevents damage from incorrect wiring
  • Selectable 250 Ohm loop resistor - flexible adaptation to the HART loop
  • Status LEDs - quick visual diagnostics of operation and faults


Application areas in industry

The gateway suits process and automation environments where HART instruments need to be connected over fiber cables.

  • Process industry and field instrumentation
  • Oil and gas facilities
  • Power plants and utilities
  • Sites with long distances between instruments and control rooms


The robust design and fiber optic isolation make this HART Gateway a reliable choice for demanding industrial environments.