Item number MODBU-GATEW-RS-485-5

Modbus Gateway RS-485/RS-232 to Ethernet with PoE, DIN-Rail

32-bit ARM CPU
1 x RJ45 10/100 PoE (802.3af Class 1)
1 x RS-485, 2 x RS-232
3000VDC signal isolation
Bias resistor 1 KOhm
Baud rate up to 115200 bps
Max. 254 node addresses
DIN-rail mounting, plastic casing
PoE or 12-48VDC terminal block
52 x 95 x 27 mm
-25 to +75C (special components required)
Humidity 10-90% RH non-condensing

170.18 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit ARM
Installation DIN-Rail Mounting
Operating Temperature 25 ~ +75 °C
Ports 10/100 Base-TX, 8-pin RJ-45 x 1, (Auto-negotiating, Auto-MDI/MDIX, LED indicator)PoE (IEEE 802.3af, Class 1)1 x RS-485 (3000VDC Signal Isolation)2 x 3-wire RS-232 (3000VDC Signal Isolation)
Consumption 0.07 A @ 24 VDC
Dimensions (mm) 52 mm x 95 mm x 27 mm (W x H x D)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Powered from Terminal Block +12 ~ 48 VDC
Baud Rate 115200 bps Max.
Parity None, Odd, Even, Mark, Space
Data Bit 5, 6, 7, 8
Stop Bit 1, 2
Casing Plastic
Powered from PoE IEEE 802.3af, Class 1
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Modbus Gateway

This Modbus gateway connects serial devices to Ethernet networks, enabling integration of RS-485 and RS-232 equipment into modern industrial systems. It is built for reliable operation in demanding environments and mounts directly on a DIN rail.


1 x RJ45 PoE · 1 x RS-485 · 2 x RS-232 · 3000VDC isolation


Features that make the difference

  • PoE powered - receives power directly via the Ethernet cable (IEEE 802.3af, Class 1)
  • Signal isolation - 3000VDC isolation protects against surges and noise
  • Flexible serial communication - supports RS-485 and two RS-232 ports simultaneously
  • Built-in bias resistor - 1 KOhm ensures stable signal on the RS-485 bus
  • Rugged design - plastic casing for DIN-rail mounting in industrial environments


Application areas

The gateway is well suited for integrating legacy serial devices into modern Ethernet-based automation systems.

  • Industrial automation and SCADA systems
  • Remote monitoring of PLCs and measurement equipment
  • Building automation
  • Integration of legacy serial devices into IP networks


A compact and reliable solution for bringing serial communication into Ethernet-based networks.