Item number HART-GATEW-PORT-RS

HART Gateway, 1-Port RS-232 to Ethernet, 10/100Base-TX

1 x HART port, RS-232 (3-wire)
10/100Base-TX Ethernet, Auto-MDIX
2-wire or 4-wire HART devices
Point to Point or Multi-Drop
Max. 15 HART devices
Burst mode supported
Short and Long Frame support
250 Ohm loop resistor via jumper
Isolation per UL1577
10-30VDC, 1W consumption
72 x 35 x 121 mm
-25 to 75C (special components required)

544.04 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Data Only Digital Data
Installation DIN-Rail or Wall Mounting
Isolation UL1577 Spec.
Operating Temperature 25 ~ +75 °C
Ports 1RS-232(3 wires)10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
Input Range Unregulated +10 ~ +30 VDC
Consumption 1 W
Dimensions (mm) 72 x 35 x 121 (W x L x H) Detail
Storage Temperature 30 ~ +80 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Power reverse polarity protection, Over-voltage brown-out protection
Protocol 2-pin screwed terminal block
Device 2-wired or 4-wired HART devices
Topology Point to Point or Multi-Drop
Frame Type Short and Long Frame
Burst Mode Supported
Max. HART Device 15
Loop Resistor 250 Ω resistor by Jumper

HART Gateway

This HART Gateway enables communication with 2-wire or 4-wire HART devices over Ethernet. It converts HART signals into digital data accessible via a standard network, making it well suited for monitoring and controlling field instruments in industrial installations.


10/100Base-TX Ethernet · RS-232 HART Port · Up to 15 HART Devices · DIN-Rail Mounting


Features for reliable operation

  • Auto-MDIX Ethernet -automatic cable detection for easy setup
  • Burst mode -supports continuous data transfer from HART devices
  • Short and Long Frame -compatible with all standard HART commands
  • Galvanic isolation -protects against noise and voltage transients
  • Reverse polarity protection -ensures stable operation if miswired


Where it fits in industrial applications

The gateway suits tasks where HART instruments need to be integrated into an Ethernet-based monitoring system.

  • Process monitoring in factory plants
  • Remote reading of field instruments
  • Integration of HART devices into SCADA systems
  • Multi-drop networks with up to 15 devices


A robust and reliable solution for bringing HART data into modern Ethernet networks.