Item number HART-RS-232-422-2

HART to RS-232/422/485 Gateway with Modbus RTU/ASCII, Loop Power

1-port HART gateway
RS-232 (3-wire) / RS-422 / RS-485
Modbus RTU / Modbus ASCII protocol
Baud rate up to 115200
Supports 2-wire or 4-wire HART devices
Point to Point or Multi-Drop topology
Max. 15 HART devices, burst mode
Loop power output +30V
10-30VDC input, 3.5W max
-40 to +75C (special components required)
25 x 116 x 120 mm, DIN-Rail
10-90% RH non-condensing

493.12 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Data Only Digital Data
Installation DIN-Rail (Upright)
Isolation UL1577 Spec.
Operating Temperature 40 ~ +75 °C
Ports 1RS-232(3 wires) / RS-422 / RS-485
Input Range Unregulated +10 ~ +30 VDC
Consumption 3.5W (Max.)
Dimensions (mm) 25 x 116 x 120 (W x L x H)
Storage Temperature 40 ~ +80 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Power reverse polarity protection, Over-voltage brown-out protection
Baud Rate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Protocol 2-pin screwed terminal blockModbus RTU / Modbus ASCII
Device 2-wired or 4-wired HART devices
Topology Point to Point or Multi-Drop
Frame Type Short and Long Frame
Burst Mode Supported
Max. HART Device 15
Loop Resistor 250 Ω (1W) by Dip-Switch
Loop Power Yes (module provides +30V output)

HART Gateway

This HART gateway converts HART signals to RS-232, RS-422 or RS-485, allowing 2-wire or 4-wire HART devices to be integrated into Modbus-based monitoring and control systems. It is well suited for industrial environments where stable communication and flexible installation are essential.


Modbus RTU/ASCII · Up to 15 HART devices · Loop power +30V · -40 to +75°C


Features that make the difference

  • Flexible serial ports - supports RS-232 (3-wire), RS-422 and RS-485
  • Wide input range - operates on unregulated 10-30VDC supplies
  • Built-in loop power - provides +30V directly to connected HART devices
  • Robust isolation - meets the UL1577 specification for reliable operation
  • Protection circuitry - withstands reverse polarity and over-voltage


Application areas

The product suits industrial installations where HART instruments need to communicate with higher-level control systems via Modbus.

  • Process monitoring in production plants
  • Integration of HART transmitters into SCADA systems
  • Multi-drop collection of several HART devices
  • Installation in cabinets with DIN-rail mounting


A robust and flexible solution for reliable integration of HART devices into Modbus networks.