Item number GW-MB485-POE

Modbus TCP to RTU/ASCII Gateway with PoE. 1 x RS-485/422, 115200 bps, 254 Nodes

Modbus TCP to RTU/ASCII gateway
1 x RS-485/422 port
1 x RJ45 10/100 Base-TX
PoE IEEE 802.3af, Class 1
Baud rate up to 115200 bps
Up to 254 nodes
Built-in 1 kOhm bias resistor
Parity none/odd/even/mark/space
Data bit 5, 6, 7, 8
Stop bit 1, 2
ARM processor
0.07A at 24VDC

150.08 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Andet Up to 254 nodes, 115200 bps max, built-in 1 kOhm bias resistor, ARM processor
Forsyning PoE or external, 0.07A at 24VDC
Interface PoE IEEE 802.3af Class 1, auto-negotiating, auto-MDI/MDIX
Montering DIN-Rail
Porte 1 x RS-485/422, 1 x RJ-45 10/100 Base-TX
Protokol Modbus TCP to Modbus RTU/ASCII

Modbus Gateway Between TCP and Serial Devices

A Modbus gateway that makes serial RS-485 devices available over Ethernet. Up to 254 nodes can be reached from a SCADA system without changes to the existing fieldbus network.


Modbus TCP to RTU/ASCII · 254 nodes · PoE powered · 115200 bps


Bridging to Existing Equipment

  • Protect the investment -serial meters and controllers can stay where they are
  • PoE supply -one cable for both data and power
  • Built-in bias resistor -1 kOhm saves external components on the bus
  • Flexible setup -parity, data bits and stop bits adapt to the device
  • RS-485 and RS-422 -both bus types on the same port


Typical Applications

Used where a modern monitoring system must read older field equipment.

  • Energy meters on RS-485
  • Variable frequency drives and motor controls
  • Legacy PLC installations
  • Building automation with Modbus RTU


The simplest route from a serial bus to a modern Modbus TCP system.