Item number ETHER-ANALO-INPUT-MODUL-10

Ethernet Analog Input Module, 10-Ch Differential/20-Ch Single-Ended, 16-bit

10 differential or 20 single-ended channels
Voltage or current input, jumper selectable
16-bit resolution
Accuracy: 0.1% normal, 0.5% fast mode
Sampling: 10 Hz normal, 50 Hz fast mode
2-way isolation: Ethernet 1500VDC, I/O 2500VDC
1 x RJ-45 10/100 Base-TX
Modbus TCP/UDP protocol
Built-in web server
10-30VDC via terminal block
72 x 123 x 35 mm
-25 to 75C (special components required)

321.60 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
Type VoltageCurrent
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V±20 mA, 0 ~ 20 mA, 4 ~ 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 2.8 W (max.)
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 10 differential or 20 single-ended (Note1),software selectable
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Hz (total channels)Fast Mode: 50 Hz (total channels)
Input Impedance Voltage: 2 MΩ (Differential), 1 MΩ (Single-ended)Current: 125 Ω
Overvoltage Protection Differential: 240 VrmsSingle-ended: 150 Vrms
Powered from Terminal Block +10 ~ +30 VDC
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP
Open Wire Detection For 4 ~ 20 mA only
Common Voltage Protection ±200 VDC
2-way Isolation Ethernet: 1500 VDCI/O: 2500 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Access Control ID, Password and IP Filter
Built-in Web Server Yes

Analog Input Module

This analog input module provides precise voltage and current measurement over Ethernet. The module is suited for industrial applications requiring reliable data acquisition with high isolation and robust protection against noise and overvoltage.


16-bit resolution · 10 differential / 20 single-ended channels · Modbus TCP/UDP · 2500 VDC isolation


Features that make the difference

  • High resolution - 16-bit A/D conversion ensures accurate measurements
  • Flexible input types - Supports both voltage and current via jumper configuration
  • Dual isolation - Protects both Ethernet and I/O from transients
  • Built-in web server - Easy configuration and monitoring without extra software
  • Robust protection - EFT, ESD and surge protection per IEC standards


Application areas

The module is designed for industrial environments where stable and accurate analog signal processing is critical.

  • Process monitoring in production facilities
  • Building automation and HVAC control
  • Remote sensor monitoring
  • Integration into SCADA and PLC systems


A reliable solution for precise analog signal processing in demanding industrial environments.