Item number ETHER-MODUL-12-DI-2

Ethernet I/O Module, 12 x DI, 6 x Isolated Open Collector Output, PoE

12 x Digital Input (Dry/Wet Contact)
6 x Isolated Open Collector Output
2 x RJ-45 10/100 Switch Ports, PoE
Modbus TCP/UDP Protocol
2500 VDC I/O Isolation
Built-in Web Server
Programmable Watchdog Timer
Load 500 mA/channel, 5~50VDC
Power on/Safe Value Programmable
-25 to 75C (special components required)
12-48VDC or PoE IEEE 802.3af
76 x 120 x 42 mm

326.96 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
PoE yes
Type Isolated Open CollectorDry ContactWet Contact
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O, PoE
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 2.9 W (max.)
Dimensions (mm) 76 x 120 x 42 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Overload Protection 1.3 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 612
Input Impedance 10 kΩ
Overvoltage Protection +60 VDC
Safe Value Programmable
Powered from Terminal Block +12 ~ +48 VDC
Sink/Source (NPN/PNP) SinkDry: SourceWet: Sink
ON Voltage Level Dry: Close to GNDWet: 1 VDC (max.)
OFF Voltage Level Dry: OpenWet: +3.5 ~ +50 VDC (max.)
Load Voltage +5 ~ +50 VDC
Load Current 500 mA/Channel
Power on Value Programmable
Protocol Modbus TCP, Modbus UDP
Powered from PoE IEEE 802.3af, Class1
Frequency 100 Hz
2-way Isolation I/O: 2500 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 5 ms
LAN bypass Yes
Access Control ID, Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module is designed for industrial monitoring and control with a high number of digital channels. It is used to collect status from sensors and switches, as well as control external devices over the network.


12 x Digital Input · 6 x Isolated Output · PoE · Modbus TCP/UDP


Features that make the difference

  • 12 digital inputs - supports both dry and wet contact for flexible sensor integration
  • 6 isolated outputs - open collector outputs for controlling relays and actuators
  • PoE powered - receives power directly via the network cable, simplifying installation
  • Built-in web server - configuration and monitoring directly via browser
  • High isolation - 2500 VDC I/O isolation protects against voltage spikes


Applications

The module suits industrial environments where reliable remote monitoring and control of I/O signals is required.

  • Building automation
  • Process monitoring
  • Remote machine control
  • SCADA and PLC integration


A robust and flexible solution for industrial I/O over Ethernet with high operational reliability.