Item number ANALO-INPUT-MODUL-CH-4

Analog Input Module 3-CH Voltage/Current, 6 DI, 3 Relay Out, PoE Ethernet

3 x Analog Input (Voltage/Current)
16-bit resolution, 2-way isolation
6 x Digital Input, Wet Contact
3 x Power Relay Output, Form A
2 x RJ45 10/100 Switch Ports, PoE
Modbus TCP/UDP Protocol
Built-in Web Server
Programmable Watchdog Timer
IEEE 802.3af PoE or +12-48VDC
76 x 120 x 42 mm
-25 to +75C (special components required)

456.94 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
PoE yes
Type Wet ContactPower Relay, Form A (SPST N.O.)VoltageCurrent
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V 0 ~ 20 mA, ±20 mA, 4 ~ 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O, PoE
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 4.1 W (max.)
Dimensions (mm) 76 x 120 x 42 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 33 (Differential)6
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Hz (total channels)Fast Mode: 50 Hz (total channels)
Input Impedance 10 kΩ, 0.5WVoltage: 2 MΩCurrent: 125 Ω
Overvoltage Protection +70 VDC240 Vrms
Safe Value Programmable
Powered from Terminal Block +12 ~ +48 VDC
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +10 ~ +50 VDC
OFF Voltage Level +4 VDC (max.)
Power on Value Programmable
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP
Open Wire Detection For 4 ~ 20 mA only
Powered from PoE IEEE 802.3af, Class1
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Operate Time 6 ms (Typical)
Release Time 3 ms (Typical)
Electrical Endurance 10^5 ops.
Mechanical Endurance 2 × 10^7 ops.
Frequency 100 Hz
2-way Isolation I/O: 2500 VDC
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 5 ms
LAN bypass Yes
Access Control ID, Password and IP Filter
Built-in Web Server Yes

Analog Input Module

This analog input module is designed for industrial data acquisition and control, combining precise voltage and current measurements with digital I/O and relay outputs. The module is ideal for automation tasks where reliable Ethernet communication is essential.


3 analog inputs · 16-bit resolution · PoE Ethernet · 3 relay outputs


Features that make a difference

  • 2-way isolation -protects against noise and voltage spikes
  • Individual channel configuration -flexible setup for each input
  • Built-in web server -easy configuration without extra software
  • Programmable watchdog -ensures stable operation during communication failure
  • PoE power -simplifies installation with a single cable


Applications

The module suits demanding industrial environments requiring stable data acquisition and control.

  • Process monitoring
  • Building automation
  • Machine control
  • Remote sensor monitoring


A robust and flexible solution for precise analog and digital I/O control in industrial networks.