Item number ETHER-MODUL-4X-ANALO

Ethernet I/O Module, 4x Analog Input, 5x DI, 5x DO, PoE

4 x Analog Input, Voltage/Current
Range 0-10VDC, 0-20mA, 4-20mA
12-bit resolution, 0.1% accuracy
5 x Digital Input, Dry/Wet Contact
5 x Isolated Open Collector Output
600 mA/channel Output Load
2500 VDC I/O Isolation
2 x RJ45 10/100 Switch Ports, PoE
Modbus TCP/UDP Protocol
12-48VDC or PoE 802.3af Powered
76 x 120 x 42 mm
-25 to 75C (special components required)

452.92 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
PoE yes
Type VoltageCurrentIsolated Open CollectorDry ContactWet Contact
Operating Temperature 25 ~ +75 °C
Resolution 12-bit
Range +0 ~ +5 VDC, ±5 VDC, +0 ~ +10 VDC, ±10 VDC0 ~ 20 mA, 4 ~ 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O, PoE
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 5.5 W (max.)
Dimensions (mm) 76 x 120 x 42 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 45
Accuracy ±0.1% of FSR
Overvoltage Protection +60 VDC+30 VDC
Voltage Output Capability 10 V @ 20 mA
Current Load Resistance 500 Ω
Power-on Value Programmable
Safe Value Programmable
Powered from Terminal Block +12 ~ +48 VDC
Sink/Source (NPN/PNP) Sink
ON Voltage Level Dry: Close to GNDWet: +1 VDC (max.)
OFF Voltage Level Dry: OpenWet: +3.5 ~ +30 VDC
Effective Distance 500m (max.)
Load Voltage +5 ~ +50 VDC
Load Current 600 mA/channel
Power on Value Programmable
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP
Open Wire Detection For 4 ~ 20 mA only
Powered from PoE IEEE 802.3af, Class1
Frequency 100 Hz
2-way Isolation I/O: 2500 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 5 ms
LAN bypass Yes
Access Control ID, Password and IP Filter
Built-in Web Server Yes

Analog Input Module

This analog input module delivers precise voltage and current measurement over Ethernet, ideal for industrial data acquisition. It combines analog and digital I/O in a single DIN-rail mounted unit with a built-in web server for easy configuration.


4 x Analog Input · 5 x Digital Input · 5 x Digital Output · PoE Supported


Features that make the difference

  • 12-bit resolution - accurate analog measurement with high precision
  • Jumper selectable ranges - flexible adaptation to voltage or current signals
  • 2500 VDC isolation - protects against noise and voltage spikes
  • PoE power supply - simplifies installation with a single cable
  • Modbus TCP/UDP - easy integration into existing SCADA/PLC systems


Application areas

The module suits monitoring and control in demanding industrial environments where reliable analog and digital I/O is required.

  • Process monitoring in production facilities
  • Remote control of pumps and valves
  • Building automation
  • Energy metering and control


A robust and flexible choice for industrial analog and digital I/O over Ethernet.