Item number ETHER-ANALO-INPUT-MODUL-9

Ethernet Analog Input Module 8-CH Voltage/Current with 4x DO

8 x Differential Analog Input
Voltage/Current selectable range
16-bit resolution
4 x Isolated Open Collector Output
2500 VDC I/O isolation
2 x RJ-45 10/100 Switch Ports
Modbus TCP/UDP protocol
Built-in Web Server
DIN-Rail mounting
12-48VDC power input
76 x 120 x 42 mm
-25 to 75C (special components required)

375.20 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
Type Isolated Open CollectorVoltageCurrent
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V±20 mA, 0 ~ 20 mA, 4 ~ 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 4.2 W (max.)
Dimensions (mm) 76 x 120 x 42 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 8 (Differential)4
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Hz (total channels)Fast Mode: 50 Hz (total channels)
Input Impedance Voltage: 2 MΩCurrent: 125 Ω
Overvoltage Protection 240 Vrms+60 VDC
Safe Value Programmable
Powered from Terminal Block +12 ~ +48 VDC
Sink/Source (NPN/PNP) Sink
Load Voltage +5 ~ +50 VDC
Load Current 700 mA/Channel
Power on Value Programmable
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP
Open Wire Detection For 4 ~ 20 mA only
Common Voltage Protection ±200 VDC
2-way Isolation Ethernet: 1500 VDCI/O: 2500 VDC
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
LAN bypass Yes
Access Control ID, Password and IP Filter
Built-in Web Server Yes

Analog Input Module

This analog input module provides precise voltage and current measurement across 8 differential channels, along with control of external devices through 4 digital outputs. The module communicates via Ethernet and is well suited for industrial automation and monitoring.


8 x Analog Input · 16-bit resolution · 4 x Digital Output · Modbus TCP/UDP


Features that make the difference

  • High resolution - 16-bit ensures accurate measurements
  • Flexible input ranges - jumper selectable voltage or current
  • Galvanic isolation - protects against noise and voltage spikes
  • Built-in web server - easy configuration without extra software
  • Robust protection - EFT, ESD and surge protection per IEC standards


Application areas

The module suits tasks that require reliable analog and digital I/O over Ethernet in industrial environments.

  • Process monitoring
  • Building automation
  • Machine control
  • Remote sensor monitoring


A reliable choice for precise analog measurement and digital control in demanding industrial applications.