Item number ETHER-ANALO-INPUT-MODUL-8

Ethernet Analog Input Module 8-ch, PoE, Modbus TCP/UDP, 16-bit

8 x Analog Input (Differential)
Voltage/Current, Jumper Selectable
4 x Isolated Open Collector Output
16-bit Resolution
Sampling: 10Hz Normal, 50Hz Fast
Modbus TCP/UDP Protocol
1 x RJ45 10/100 Base-TX, PoE
Built-in Web Server
2500VDC I/O Isolation
12-48VDC or PoE 802.3af
72 x 123 x 35 mm
-25 to 75C (special components required)

336.34 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
PoE yes
Type VoltageCurrentIsolated Open Collector
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V±20 mA, 0 ~ 20 mA, 4 ~ 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, PoE
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 3.2 W (max.)
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 48 (Differential)
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Hz (total channels)Fast Mode: 50 Hz (total channels)
Input Impedance Voltage: 2 MΩCurrent: 125 Ω
Overvoltage Protection +60 VDC240 Vrms
Safe Value Programmable
Powered from Terminal Block +12 ~ +48 VDC
Sink/Source (NPN/PNP) Sink
Load Voltage +5 ~ +50 VDC
Load Current 700 mA/Channel
Power on Value Programmable
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP
Open Wire Detection For 4 ~ 20 mA only
Powered from PoE IEEE 802.3af, Class1
Common Voltage Protection ±200 VDC
2-way Isolation I/O: 2500 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Access Control ID, Password and IP Filter
Built-in Web Server Yes

Analog Input Module

This analog input module enables precise measurement of voltage and current across 8 differential channels, along with control via 4 isolated outputs. It is designed for industrial data acquisition and automation over Ethernet.


8 x Analog Input · 16-bit Resolution · PoE · Modbus TCP/UDP


Features that make the difference

  • High precision - 16-bit resolution with accuracy down to ±0.1%
  • Flexible signal type - jumper selectable between voltage and current
  • Isolated design - 2500 VDC isolation protects against noise and transients
  • PoE powered - reduces cabling needs and simplifies installation
  • Built-in web server - easy configuration and monitoring without extra software


Application areas

The module suits tasks requiring reliable analog data acquisition in industrial environments.

  • Process monitoring in production plants
  • Temperature and pressure measurement via analog sensors
  • Remote automation over Ethernet
  • Integration into SCADA and PLC systems


With high isolation, flexible inputs and robust PoE power, this module is the right choice for demanding industrial measurement tasks.