Item number ANALO-INPUT-MODUL-10-3

Analog Input Module 10-CH, Ethernet PoE, Modbus TCP/UDP, 16-bit

10 differential / 20 single-ended inputs
Voltage and current input types
16-bit resolution
Accuracy 0.1% (Normal), 0.5% (Fast)
Sampling up to 50 Hz (Fast Mode)
Modbus TCP / UDP protocol
1 x RJ-45 10/100 Base-TX, PoE
2500 VDC I/O isolation
Built-in web server
12-48VDC or PoE IEEE 802.3af
72 x 123 x 35 mm
-25 to 75C (special components required)

345.72 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
PoE yes
Type VoltageCurrent
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V±20 mA, 0 ~ 20 mA, 4 ~ 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, PoE
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 3.3 W (max.)
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 10 differential or 20 single-ended (Note1),software selectable
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Hz (total channels)Fast Mode: 50 Hz (total channels)
Input Impedance Voltage: 2 MΩ (Differential), 1MΩ(Single-ended)Current: 125 Ω
Overvoltage Protection Differential: 240 VrmsSingle-ended: 150 Vrms
Powered from Terminal Block +12 ~ +48 VDC
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP
Open Wire Detection For 4 ~ 20 mA only
Powered from PoE IEEE 802.3af, Class1
Common Voltage Protection ±200 VDC
2-way Isolation I/O: 2500 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Access Control ID, Password and IP Filter
Built-in Web Server Yes

Analog Input Module

This analog input module is designed for industrial data acquisition over Ethernet, used to measure voltage and current signals with high accuracy. It is well suited for automation and process control applications requiring reliable communication and isolation.


10 differential / 20 single-ended channels · 16-bit resolution · Modbus TCP/UDP · PoE


Key Features

  • Flexible input types -supports both voltage and current measurements
  • High accuracy -0.1% in Normal Mode and 0.5% in Fast Mode
  • Galvanic isolation -2500 VDC I/O isolation protects against noise and damage
  • PoE powered -can be powered directly through the Ethernet cable
  • Built-in web server -easy configuration and monitoring without extra software


Application Areas

The module fits applications requiring accurate analog data acquisition in industrial network environments.

  • Process automation
  • Building automation
  • Remote sensor monitoring
  • Machine control


A robust and flexible solution for reliable analog signal processing in industrial Ethernet networks.