Item number CHANN-ANALO-OUTPU-MODUL-2

4-Channel Analog Output Module, 16-bit RS-485, -25 to +75°C

4 x Analog Output Channels
16-bit Resolution, +/-0.02% Accuracy
Multiple Voltage/Current Ranges
RS-485 Port, DCON Protocol
3000VDC Isolation
Watchdog Timer
Short Circuit Protection
Open Wire Detection (4-20mA)
Power-on and Safe Value
15-30VDC Power Input
-25-75C (special components required)
31 x 134 x 144 mm

372.52 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Operating Temperature -25 ~ +75 °C
Resolution 16-bit
Range 0 ~ +5 VDC, ±5 VDC, 0 ~ +10 VDC, ±10 VDC, 0 ~ +20 mA, +4 ~ +20 mA
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)
Status 1 x Power and Communication8 x Analog Output Fault
Ports 1 x RS-485
Consumption 4 W Max.
Dimensions (mm) 31 x 134 x 144 (W x L x H)
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3000 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 4
Accuracy ±0.02% of FSR
Zero Drift ±0.2 μV/°C
Span Drift ±25 ppm/°C
Programmable Output Slope Voltage: 0.0625 ~ 512 V/SecondCurrent: 0.125 ~ 1024 mA/Second
Current Output Wiring Source
Voltage Output Capability 1000 Ω
Short Circuit Protection Yes
Power-on Value Yes
Safe Value Yes
Powered from Terminal Block Yes, 15 ~ 30 VDC
Baud Rate 1200 to 115200 bps
RS Immunity (IEC 61000-4-3) 3 V/m, 80 MHz ~ 1 GHz
Data Format N, 8, 1
Protocol DCON
DA Output Response Time 10 ms per channel
Open Wire Detection Yes, +4 ~ +20 mA

Analog Output Module

This analog output module converts digital control signals into precise voltage or current outputs for automation and process control systems. It connects via RS-485 using the DCON protocol, making it easy to integrate into existing industrial networks.


4 Channels · 16-bit Resolution · RS-485 / DCON · -25 to 75°C


Reliable Analog Signal Conversion

  • 4 analog output channels - independent voltage and current signals
  • 16-bit resolution - accurate output with ±0.02% FSR accuracy
  • Multiple output ranges - voltage and current selectable per channel
  • Watchdog timer - automatic recovery from communication faults
  • Open wire detection - identifies broken 4-20mA current loops


Built for Industrial Environments

The module withstands harsh conditions and is suited for demanding industrial installations where stable analog output control is required.

  • Process control and automation systems
  • Building and factory monitoring
  • Remote I/O expansion via RS-485
  • Applications with wide temperature variation


A robust and precise analog output solution for demanding industrial applications.