PoE PSU / PoE Injector / PoE splitter

PoE PSU / PoE Injector / PoE splitter

PoE PSU / PoE Injector / PoE splitter
There are 36 products.
PoE tester - For units over PoE network - Danbit

Quick and Easy PoE tester
IEEE 802.3af / at
UTP Cat 5 or above
100 meters max.
Dimensions: 23 x 70.1 x 22 mm | Operating temperature: -10 ~ 60 C
weight: 20g

214.00 kr
Item numberPOE-TESTER
Physically in stock
IP67 tight Gigabit PoE++ injector (60W) PoE + Data. 24 -56VDC input POE step up 24vdc to 48/56Vdc POE step up

IP67 and IK10 Gbit PoE injector for outdoor mounting
PoE++ (60W) injector for PoE equipment
1 x RJ45 port for PoE++ out Data+PoE
1 x RJ45 port Data in
1 x Phoenix connector for the input voltage
DC24V 72W input
DC36V 71W input
DC54V 66W input
PoE standard: IEEE 802.3at/bt (PoE++)
PoE out Mid-span / End-span
Operating temperature: -40 - +75°C
Wall bracket
Dimensions: 170 x 73 x 44 mm
Weight: 425

1,250.00 kr
Item numberETH-POE++INJ-WP
Physically in stock
Gigabit PoE++ splitter (60W) for PoE Data and 12VDC/5A or 19VDC/3.2A or 24VDC/2.5A out

Gigabit PoE splitter for indoor installation

PoE++ (60W) splitter with optional DC output for non-PoE equipment

DC output: 12VDC/5A or 19VDC/3.2A or 24VDC/2.5A

1 x RJ45 port for PoE++ in from switch or PoE Injector

1 x RJ45 port (data) for non-PoE equipment

1 x DC Jack connector (5.5/2.5mm) for equipment

PoE standard: IEEE 802.3at/bt (PoE++)

IEEE 802.3at (PoE+ Mid-span)

IEEE 802-3bt (PoE++ PoH HDBaseT) - type 4

Operating temperature: 0 - +50°C

Wall bracket

Additional DIN brackets

Dimensions: 94 x 70 x 39 mm

Weight: 265g

1,302.00 kr
Item numberETH-POE60SPLIT
On the way in
PoE adapter - Passive DC injector / splitter cable for Access Points and CCTV - DANBIT

PoE adapter
DC injector / splitter cable
Supports 5/12/24 / 48V
Range: Up to 40m
Dimensions DC plug: 5.5 / 2.1mm
Length cable : 15cm
Set of 2 pcs. cables - injector and splitter

84.00 kr
Item numberK-POE-SPLIT
Physically in stock
PoE repeater with 4 outputs

10/100/1000Mbit network extender / PoE splitter
1 x PoE input (PD) PoE++ 95W
4 x PoE outputs (PSE) PoE+ 32W
Up to 32W per PoE port, 65W total power budget (see specifications)
Extend the network cable over the maximum 100 meters for PoE solutions
Extenders are powered by PoE and pass PoE on to the next extender
Dimensions: 168 x 93 x 32 mm, Weight: 403g

1,208.00 kr
Item numberETH-POE-BOOST-4G
On the way in
PoE extends - Large selection

Power over Ethernet - No Additional Power Source Required
Extend a POE signal max. 100m over a single CAT cable (cat 5 or higher)

473.00 kr
Item numberETH-EXT-POE
Physically in stock
24 ports Mid-span PoE injektor, 10/100Mbit, 230VACforInjector

24 ports PoE strømforsyning med 15,4 Watt per port
LAN uden PoE ind, giver LAN med PoE ud
Til 10/100Mbit netværk

3,069.00 kr
Item numberETH-POE24I+
Physically in stock
4-Port Multi-Gigabit 802.3bt PoE++ 90Watt Injector Hub. Power budget is160 Watt

4 x 10/100/1G/2.5G/5GBASE-T Gbit RJ45 data input
4 x 10/100/1G/2.5G/5GBASE-T Gbit RJ45 data + PoE output
100~240VAC, 3.33Amp PSU with DC 52V~54V power output
Complies with 802.3bt PoE Plus Plus end-span and mid-span PSE
Backward compatible with IEEE 802.3at PoE Plus end-span/mid-span PSE
Up to 4 IEEE 802.3at/IEEE 802.3bt PoE devices powered
4 x PoE ports with 90-watt 802.3bt PoE++ type 4 PSE or 95-watt PoH PoE injector function
4 x PoE ports support 802.3at end-span/mid-span PoE+ 36-watt injector function
DIP switch for 802.3bt, PoH and Force mode selection
Auto detects if devices can be PoE powered (PD)
Circuit protection prevents power interference between ports
Forwards both Ethernet data and PoE power to remote device over a 100-meter distance
EEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet., IEEE 802.3ab Gigabit Ethernet
IEEE 802.3bz 2.5G/5GBASE-T, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Dimensions: 94 x 70.3 x 39.2 mm
Weight: 275g
Enclosure: Metal case

 

2,604.00 kr
Item numberETH-POE4GH++
On the way in
PoE++ Splitter with 12VDC/5.8A or 24VDC/2.2A output voltage

PoE++ splitter - separate DC and Data
Data without PoE to equipment
DC voltage output to non-PoE device
Max. 70 Watt
Data is 10/100/1000Mbit/s
PoE 802.3at/bt
End-span + Mid-span
End-span or Mid-span
2  x RJ45 interfaces
1 x RJ45 port Data + Power input
1 x RJ45 port Data output
2 x DC output (4-pin terminal block)
DC output 12VDC or 24VDC w/DIP switch
Size: 135 x 88 x 32 mm
DIN-mount
Weight: 445g

1,622.00 kr
Item numberETH-POE++12-24-D
On the way in
PoE Gigabit 95Watt Injector PoE++, Output voltage 54VDC, Supply 12 - 54VDC

PoE++ power supply via Ethernet cable, up to 95 Watt
LAN without PoE in, gives LAN with PoE out
PoE++ 54VDC/95W
Mid-span and End-span give 95 Watts
For 100/1000/2500/5000Mbit networks.
PoE power output DC 24V~54V input: Max. 89.5W@1m cable, Max. 75W@100m cable
PoE power output DC 12V input: Max. 60W@1m cable, Max. 52W@100m cable
Temperature range: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
DIN installation
Powersupply input from 12 - 54VDC

2,016.00 kr
Item numberETH-POE54-95W
Physically in stock
PoE Gigabit 60Watt Injector PoE++, Output voltage approx. 50VDC, Supply 48 - 54VDC, 2A. YOUR

PoE++ power supply via Ethernet cable, up to 60 Watt
LAN without PoE in, gives LAN with PoE out
PoE++ 48-53VDC/60W
Mid-span and End-span give 60Watt
For 100/1000/2500/5000Mbit networks.
Power is supplied from 48 - 54VDC
Temperature range: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
DIN mount

1,623.00 kr
Item numberETH-POE50-60W
On the way in
PoE++ extender / Extender PD over Cat6 and up, up to 200 meters, PoE++ in and 4 x PoE+ out

4 port PoE pass through - 10/100/1000Mbit
1 x RJ45 PoE in (data + PoE++) - 95 Watt
Mid-span and End-span
4 x RJ45 PoE out (data + PoE+) - 30 Watt
PoE out pin: +1/2, -3/6
PoE output power, total is max. 75 Watt
PoE input voltage 50 - 57VDC
Temperature: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
Your bracket

1,737.00 kr
Item numberETH-POE-BOOST-4G+
On the way in
PoE Extender for 2-wire twisted pair cable, 100Mbps, up to 500 meters. 48-56VDC input

PoE Extender up to 500 meters

Max speed 100Mbps

Automatic speed control

Consists of Local and Remote Module

The connection is twisted-pair 2-wire cable

Local module powered from PoE source or DC input

DC input: 48-56VDC

PoE power: 30 Watts

Dimensions: See drawings

Temperature: -20 - +60°C

935.00 kr
Item numberETH-EXT-POE+
Physically in stock
PoE++ Extender | 95W In and 65W Out | 100M Extender

10/100 / 1000Mbit PoE Network Extender
Extend the network cable with PoE over the magic 100 meters
Extenders are powered from PoE and pass PoE on to the next Extender
Dimensions: 94 x 70 x 26 mm

PoE In: Max 95 Watts

PoE Out: Max 65 Watts
Weight: 189g

1,050.00 kr
Item numberETH-POE-BOOST-1G++
On the way in
Showing 21-36 of 36 item(s)