Item number ETH-POE2+12-56
2 x PoE+ injector 2 x PoE + PSE and 2 x LAN. Gigabit. Mid-Span injector 802.3at. 2 x 36watt. 12 - 56VDC input
2 Ports Poe Injector provides 2 x 36Watt for PD equipment
10/100/1000 Mbit
pin 4/5 (+), pin 7/8 (-)
4 x RJ45 (2 with data and 2 with data + PoE for equipment)
supply voltage: 12 - 56VDC
Power Budget is 60 - 72 Watt
Dim: 105 x 70 x 30 watts
Weight: 280g
Operating temperature: -40 - + 75 ° C
DIN mounting
149.41 €
Excl. VAT
Quantity
Physically in stock
POE-260-serien kan levere 36 watt 54V DC strøm over Cat. 5/5e/6 Ethernet-kabler, der tillader data og strøm at overføre samtidigt gennem kablet mellem injektoren (IPOE-260-serien) og PoE PD (powered device) eller PoE-splitter (IPOE-162S). Den maksimale afstand mellem injektoren og splitteren er 100 meter. IPOE-260-serien er også kompatibel med IEEE 802.3af PoE PD- eller PoE-splitter og giver en maksimal effekt på op til 15,4 watt. Med Industrial IEEE 802.3at Power over Ethernet Plus-enheder installeret, behøver systemadministratoren kun at bruge ét enkelt RJ45 Ethernet-kabel til at føre både strøm og data til hver enhed. Det ville gøre netværksimplementeringen nemmere og mere pålidelig.
Praktisk og pålideligt strømsystem
For at lette 802.3at PoE-brugen med almindeligt anvendte 12~54V DC strømtilførsel til transport og industrielt applikationer, anvender IPOE-260-12V 12~54V DC til 54V strømforstærkningsteknologi for at løse strømkildeproblemet, men kræver ikke særlige strømforsyninger. Dens omfattende spændingsdesign er velegnet til verdensomspændende drift med høj tilgængelighed applikationer, der kræver dobbelt eller backup strømindgange.
48VDC 2.5A (120Watt) from 100-240VAC power supply, adjustable from 48 - 55VDC, DIN rail
AC / DC power supply for DIN rail mounting
Output voltage: 48 - 55VDC adjustable from front
100-240V AC, 50 / 60Hz, 2.5A
output 120 watt, 48V, 2.5A
screw terminal
short-circuit, overload and overvoltage protection
Dimensions: 40 x 125 x 113 mm
Working temperature: -20-70 ° C,
90.18 €
Item number:DC48V120W-D
DIN Rail Power Supply 120W, 12VDC Output, 180~550VAC Wide Input, Free Air Convection, UL508
120W single output power supply
DIN rail mount
Output 12V / 10A
Rated power 120W
Input 180-550VAC single/two phase
Input 254-780VDC
Frequency 47-63Hz
Efficiency 89.5% at 400V
Ripple and noise 120mVp-p max
Voltage adj. 12-15V
Protections: SC/OL/OV/OT
Built-in DC OK relay contact
Free air convection cooling
DIN rail TS-35/7.5 or TS-35/15
UL508 approved
Working temp -25 to +70C
40 x 125.2 x 113.5 mm
Weight 0.65Kg
85.76 €
Item number:DC12V10A-D
Other products in the same category:
PoE injector which provides 12V, 19V or 24V DC passive PoE for equipment - non-standard
Passive PoE Injector with 12 / 19 / 24 VDC 0.7A output
From Active to Passive PoE converter
PoE input port: IEEE 802.3af/at RJ-45 STP / PD. Supplied from an active PoE switch
Passive PoE output port: non-802.3af/at RJ-45 STP / PSE. For equipment that is NOT for active PoE.
83.48 €
Item number:ETH-POE50PAS
4 Ports PoE Switch / PoE Injector 60 Watt per port. PoE 48 or 56VDC. Gigabit. 1 XRJ45 Uplink, 4 x RJ45 PoE port.
4 x RJ45 port with PoE ++ (Ultra PoE)
1 x RJ 45 Uplink port (not PoE).
60W for every PoE-Port
Power Budget is 120 watts
IEEE 802.3at / by PoE.
Dip on / off PoE
Power supply: 100 - 240VAC
Operating temperature: 0 - +40°C
Size: 119 x 88 x 27 mm
Weight: 1.3 kg
257.82 €
Item number:ETH-POE-DIP-4X1G
PoE+ Gigabit Injector, 30 Watt. PoE out 56VDC, Supply voltage 12 - 48VDC, -40 - +75°C
POE power supply via Ethernet cable, up to 30 watt
LAN without PoE in, gives LAN with PoE out
Poe +, 56VDC / 30W
10/100/1000Mbit network.
Power supplies from 12 -48VDC / 32W Max
Redundant Power Input via Terminal Block
Power supply not included
Dim: 135 x 87 x 32 mm
Operating temperature: -40 ~ +75°C
131.32 €
Item number:ETH-POE56-DC12-48
4 ports PoE injector++, 95 Watt, 4 x into LAN, 4 x LAN out with PoE++, PoE 48-54VDC, Gigabit DIN, 48 - 54VDC, -40 - +75°C
Connect switches without PoE for PoE PSE to Equipment
IEEE 802.3bt back compatible to IEEE 802.3at
Supports 10/100 / 1000Mbit speeds
4 x LAN input from the switch without PoE
4 x LAN with up to 95 Watt PoE
Max. PoE power total is 240Watt (PoE power budget)
Auto-detect devices with PoE input for not destroying not PoE
Supply voltage: 48 - 54VDC max. 244 Watt
Setting with DIP switches
DIN bracket for wall mounting and
Operating temperature: -40 - +75°C
Dimensions: 135 x 88 x 50 mm
Weight: 537g
313.02 €
Item number:ETH-POE4GH+
48V Passive PoE power injector with RJ45, 0.5 amps to power outlet
Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 48V 0.5A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm ( LxWxH)
Weight: 104g
40.87 €
Item number:ETH-POE-POC48
IP67 IK10 Poe Injector, 30 Watt PoE+ PoE 56VDC. Gigabit, End Span, Supply Voltage 24 - 56VDC, Waterproof
Waterproof Outdoor PoE+ Injector 30Watt
1 x RJ45 Data
1 x RJ45 Data and PoE+
1 x 2-pin DC Phoenix connectors
IK10 Vandal safe
Supply voltage: 24 - 56VDC
POE Standard: IEEE 802.3 at / af
End-Span
Pin: (+ 1.2) (- 3.6)
Operating temperature: -40 - +75°C
wall mounting
Size: 170 x 73 x 44 mm
Weight: 340g
164.28 €
Item number:ETH-POE30-WP











