Injector

Injector

A PoE (Power Over Ethernet) injector is used as a power supply between e.g. a Router and other network device, e.g. a switch. That way you won't have to add additional units, making installation and setup easier. At DANBIT we have a larger selection of PoE injectors, splitters and switches. We offer anywhere from 12V to 48V and up to 24 ports.

See the selection of our PoE Injectors below.

Injector
There are 21 products.
24 port Gigabit Midspan PoE Injector, 15Watt per port, 230VAC

Switches without PoE can with this Injector "upgraded" to PoE switch
24 ports PoE full power supply

Per port DC 52V 30.8/15.4 watts
LAN without PoE in, LAN with PoE out
10 / 100 / 1000Mbit network

Max PoE 440 Watts

 

3,900.00 kr
Item numberETH-POE24G
Physically in stock
DC POE injector 12v, 19v, 24vdc over ethernet cable

Passive PoE Injector with 12 / 19 / 24 VDC 0.7A output
From Active to Passive PoE converter
PoE input port: IEEE 802.3af/at RJ-45 STP / PD. Supplied from an active PoE switch
Passive PoE output port: non-802.3af/at RJ-45 STP / PSE. For equipment that is NOT for active PoE.

623.00 kr
Item numberETH-POE50PAS
Physically in stock
2 x PoE+ injektor 2 x PoE+ PSE og 2 x LAN. Gigabit. Mid-span injektor

2 Ports Poe Injector provides 2 x 36Watt for PD equipment
10/100/1000 Mbit
pin 4/5 (+), pin 7/8 (-)
4 x RJ45 (2 with data and 2 with data + PoE for equipment)
supply voltage: 12 - 56VDC
Power Budget is 60 - 72 Watt
Dim: 105 x 70 x 30 watts
Weight: 280g
Operating temperature: -40 - + 75 ° C
DIN mounting

1,115.00 kr
Item numberETH-POE2+12-56
Physically in stock
PoE Switch CAT. 5/6/7/8 60W for every PoE-port

4 x RJ45 port with PoE ++ (Ultra PoE)
1 x RJ 45 Uplink port (not PoE).
60W for every PoE-Port
Power Budget is 120 watts
IEEE 802.3at / by PoE.
Dip on / off PoE 
Power supply: 100 - 240VAC 
Operating temperature: 0 - +40°C
Size: 119 x 88 x 27 mm
Weight: 1.3 kg

1,924.00 kr
Item numberETH-POE-DIP-4X1G
On the way in
PoE+ Injector Powered by External 12 - 48V Supply

POE power supply via Ethernet cable, up to 30 watt
LAN without PoE in, gives LAN with PoE out
Poe +, 56VDC / 30W
10/100/1000Mbit network.
Power supplies from 12 -48VDC / 32W Max
Redundant Power Input via Terminal Block
Power supply not included
Dim: 135 x 87 x 32 mm
Operating temperature: -40 ~ +75°C

980.00 kr
Item numberETH-POE56-DC12-48
Physically in stock
4 Port PoE Injector ++, 95 Watt, 4 x LAN in, 4 x LAN out with PoE++

Connect switches without PoE for PoE PSE to Equipment
IEEE 802.3bt back compatible to IEEE 802.3at
Supports 10/100 / 1000Mbit speeds
4 x LAN input from the switch without PoE
4 x LAN with up to 95 Watt PoE
Max. PoE power total is 240Watt (PoE power budget)
Auto-detect devices with PoE input for not destroying not PoE
Supply voltage: 48 - 54VDC max. 244 Watt
Setting with DIP switches
DIN bracket for wall mounting and
Operating temperature: -40 - +75°C
Dimensions: 135 x 88 x 50 mm
Weight: 537g

2,336.00 kr
Item numberETH-POE4GH+
Physically in stock
48VDC Passive PoE Injector with RJ45, POC

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 48V 0.5A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm ( LxWxH)
Weight: 104g

305.00 kr
Item numberETH-POE-POC48
Physically in stock
IP67 PoE Injector, 30 Watt Poe + Gigabit, End-Spam, Supply voltage 24 - 56VDC

Waterproof Outdoor PoE+ Injector 30Watt
1 x RJ45 Data
1 x RJ45 Data and PoE+
1 x 2-pin DC Phoenix connectors
IK10 Vandal safe
Supply voltage: 24 - 56VDC
POE Standard: IEEE 802.3 at / af
End-Span
Pin: (+ 1.2) (- 3.6)
Operating temperature: -40 - +75°C
wall mounting
Size: 170 x 73 x 44 mm
Weight: 340g

1,226.00 kr
Item numberETH-POE30-WP
Physically in stock
24V Passive PoE injector with RJ45, POC

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 24V 1A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm (LxWxH )
Weight: 104g

200.00 kr
Item numberETH-POE-POC24
Physically in stock
12VDC Passive PoE Injector with RJ45, POC

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 12VDC 1A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm (LxWxH )
Weight: 104g

200.00 kr
Item numberETH-POE-POC12
Physically in stock
PoE tester - For units over PoE network - Danbit

Quick and Easy PoE tester
IEEE 802.3af / at
UTP Cat 5 or above
100 meters max.
Dimensions: 23 x 70.1 x 22 mm | Operating temperature: -10 ~ 60 C
weight: 20g

214.00 kr
Item numberPOE-TESTER
Physically in stock
ETH-POEGH supplies up to 4 LAN networks with PoE+ for e.g. IP cameras

LAN without PoE voltage gives LAN with PoE
4 port PoE power supply 30 Watt per port
Connects between non-PoE switch and e.g. IP cameras with PoE
For 10/100/1000Mbit networks
Power supply included
Can be powered with 52-56VDC / 122Watt
Pin 4/5 +, 7/8 - (Mid-span)
Dimensions: 97 x 70 x 26 mm
Temp: -10 - +70°C

1,016.00 kr
Item numberETH-POE4GH
Physically in stock
24-ports 10 100Mbit PoE mid-span injectorforInjector

24-ports PoE strømforsyning 30 W, 10/100 Mbit

2,670.00 kr
Item numberETH-POE24U
Physically in stock
24 ports Mid-span PoE injektor, 10/100Mbit, 230VACforInjector

24 ports PoE strømforsyning med 15,4 Watt per port
LAN uden PoE ind, giver LAN med PoE ud
Til 10/100Mbit netværk

3,069.00 kr
Item numberETH-POE24I+
Physically in stock
4-Port Multi-Gigabit 802.3bt PoE++ 90Watt Injector Hub. Power budget is160 Watt

4 x 10/100/1G/2.5G/5GBASE-T Gbit RJ45 data input
4 x 10/100/1G/2.5G/5GBASE-T Gbit RJ45 data + PoE output
100~240VAC, 3.33Amp PSU with DC 52V~54V power output
Complies with 802.3bt PoE Plus Plus end-span and mid-span PSE
Backward compatible with IEEE 802.3at PoE Plus end-span/mid-span PSE
Up to 4 IEEE 802.3at/IEEE 802.3bt PoE devices powered
4 x PoE ports with 90-watt 802.3bt PoE++ type 4 PSE or 95-watt PoH PoE injector function
4 x PoE ports support 802.3at end-span/mid-span PoE+ 36-watt injector function
DIP switch for 802.3bt, PoH and Force mode selection
Auto detects if devices can be PoE powered (PD)
Circuit protection prevents power interference between ports
Forwards both Ethernet data and PoE power to remote device over a 100-meter distance
EEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet., IEEE 802.3ab Gigabit Ethernet
IEEE 802.3bz 2.5G/5GBASE-T, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Dimensions: 94 x 70.3 x 39.2 mm
Weight: 275g
Enclosure: Metal case

 

2,604.00 kr
Item numberETH-POE4GH++
On the way in
PoE Gigabit 95Watt Injector PoE++, Output voltage 54VDC, Supply 12 - 54VDC

PoE++ power supply via Ethernet cable, up to 95 Watt
LAN without PoE in, gives LAN with PoE out
PoE++ 54VDC/95W
Mid-span and End-span give 95 Watts
For 100/1000/2500/5000Mbit networks.
PoE power output DC 24V~54V input: Max. 89.5W@1m cable, Max. 75W@100m cable
PoE power output DC 12V input: Max. 60W@1m cable, Max. 52W@100m cable
Temperature range: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
DIN installation
Powersupply input from 12 - 54VDC

2,016.00 kr
Item numberETH-POE54-95W
Physically in stock
PoE Gigabit 60Watt Injector PoE++, Output voltage approx. 50VDC, Supply 48 - 54VDC, 2A. YOUR

PoE++ power supply via Ethernet cable, up to 60 Watt
LAN without PoE in, gives LAN with PoE out
PoE++ 48-53VDC/60W
Mid-span and End-span give 60Watt
For 100/1000/2500/5000Mbit networks.
Power is supplied from 48 - 54VDC
Temperature range: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
DIN mount

1,623.00 kr
Item numberETH-POE50-60W
On the way in
Showing 1-20 of 21 item(s)