Item number ETHER-MODUL-2X-DIGIT-4

Ethernet I/O Module with 2x Digital Input, 2x PhotoMOS Relay Output, Modbus TCP/MQTT

2 x Digital Input, Dry Contact
2 x PhotoMOS Relay Output, Form A
Modbus TCP, Modbus UDP, MQTT
1 x RJ-45 10/100 Base-Tx
Built-in Web Server
Password and IP Filter Access Control
Isolation up to 3750 Vrms
ESD +-4kV Contact, +-8kV Air
12-48VDC, 0.9W
52 x 95 x 27 mm
-25 to +75C (special components required)
DIN-Rail mounting

135.34 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit MCU
Installation DIN-Rail Mounting
Isolation 3750 VRMS3000 VRMS
Type Dry ContactPhotoMOS Relay, Form A
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 0.9 W
Dimensions (mm) 52 x 95 x 27 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 to 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 2
Powered from Terminal Block +12 to +48 VDC
Sink/Source (NPN/PNP) Source
ON Voltage Level Close to GND
OFF Voltage Level Open
Effective Distance 500m (max.)
Protocol Modbus TCP, Modbus UDP, and MQTT
Contact Rating 60V/1.0A (Operating Temperature -25 to +40°C)60V/0.8A (Operating Temperature +40 to +60°C)60V/0.7A (Operating Temperature +60 to +75°C)
Operate Time 1.3 ms (Typical)
Release Time 0.1 ms (Typical)
Electrical Endurance Long Life and No Sparking
Frequency 3.5 kHz (without filter)
EFT (IEC 61000-4-4) ±4 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 0.15 ms
Access Control Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module provides digital input and relay output over the network, designed for industrial monitoring and control. It communicates via standard protocols and integrates easily into existing automation systems.


2 x Digital Input · 2 x PhotoMOS Relay Output · Modbus TCP/UDP and MQTT · 12-48VDC


Features and Benefits

  • Digital input - 2 channels with dry contact for status and pulse reading
  • PhotoMOS relay output - 2 channels with long life and no sparking
  • Built-in web server - easy configuration and monitoring via browser
  • High isolation - up to 3750 Vrms protects against electrical disturbances
  • Robust EMC protection - EFT and ESD immunity ensures stable operation in industrial environments


Applications

The module suits tasks where digital signals need remote monitoring and control over the network.

  • Factory automation
  • Building management
  • Remote equipment monitoring
  • Distributed I/O in industrial networks


A reliable choice for remote digital I/O over Ethernet with a rugged industrial design.