Item number ETHER-MODUL-OPC-UA

Ethernet I/O Module with OPC UA Server, MQTT Client, 4x AI/AO, PoE

OPC UA Server, MQTT Client, REST API
Web based configuration interface
4 x Analog Input, 16-bit V/I
4 x Analog Output, 12-bit V/I
4 x Digital I/O, Counter 100Hz
2 x RJ45 PoE Switch Ports
IEEE 802.3af Class 3 PoE
DIN-Rail mounting
12-48VDC or PoE powered
-25/+75C (special components required)
97 x 120 x 47 mm

Call +45 56 66 20 20 for price
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit CPU (400 MHz)
Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
PoE yes
Type Dry ContactWet ContactVoltage, Current
Operating Temperature -25 °C ~ +75 °C
Resolution 12-bit16-bit
Range +0 to +5 VDC, ±5 VDC, +0 to +10 VDC, ±10 VDC, 0 to 20 mA, 4 to 20 mA (Jumper Selectable)±500 mV, ±1 V, ±5 V, ±10 V0 to 20 mA, ±20 mA, 4 to 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 8.2 W
Dimensions (mm) 97 x 120 x 47 (W x L x H)
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 44 (Differential)
Accuracy ±0.1% of FSRNormal Mode: ±0.1%Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 samples/second (Total)Fast Mode: 50 samples/second (Total)
Input Impedance Voltage: 2 MΩCurrent: 125 Ω
Overvoltage Protection 240 Vrms+30 VDC
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Voltage Output Capability 10 V @ 20 mA
Current Load Resistance 400 Ω
Power-on Value Programmable
Safe Value Programmable
Powered from Terminal Block +12 ~ +48 VDC
ON Voltage Level Dry: OpenWet: +1 VDC (max.)
OFF Voltage Level Dry: Close to GNDWet: +3.5 to +30 VDC
Effective Distance 500m (max.)
Common Mode Rejection 86 dB (min.)
Normal Mode Rejection 100 dB
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Protocol • OPC UA Server / Client• MQTT Client• RESTful API
Open Wire Detection For 4 ~ 20 mA onlyYes
Powered from PoE IEEE 802.3af, Class3
Common Voltage Protection ±200 VDC
Frequency 100 Hz
Function • Web Interface for Configuration• Scaling• Security• Rule Setting• Schedule• Event Log• IoTstar Setting
2-way Isolation I/O: 2500 VDC
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 5 ms
LAN bypass Yes
Access Control ID, Password and IP Filter

Ethernet I/O Module

This Ethernet I/O module combines analog and digital I/O with a built-in OPC UA Server and MQTT Client, allowing direct integration into IIoT and SCADA systems without an extra gateway. It is designed for industrial data acquisition and remote control in demanding environments.


OPC UA Server · MQTT Client · 4x Analog I/O · PoE Powered


Features That Make a Difference

  • OPC UA and MQTT - native support for IIoT protocols without extra hardware
  • 4 x Analog Input - 16-bit resolution for voltage and current
  • 4 x Analog Output - 12-bit programmable voltage and current output
  • 4 x Digital I/O - counter and frequency measurement up to 100 Hz
  • PoE Powered - data and power over a single cable via 2 x RJ45 ports


Typical Applications

The module fits tasks where reliable data acquisition and remote monitoring are essential.

  • Industrial process monitoring
  • Remote data acquisition
  • Building automation
  • SCADA and IIoT integration


A robust and flexible solution for modern industrial automation.