Item number ETHER-MODUL-DIGIT-INPUT-19

Ethernet I/O Module with 2 x Digital Input, 2 x Open Collector Output, PoE

2 x Digital Input, Wet Contact
2 x Open Collector Output, Source
Modbus TCP, Modbus UDP, MQTT
1 x RJ45 10/100 Base-Tx, PoE
PoE IEEE 802.3af Class 1
Built-in Web Server
Isolation 3750 Vrms
DIN-Rail mounting
12-48VDC via Terminal Block
25 to 75C (special components required)
52 x 95 x 27 mm

127.30 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit MCU
Installation DIN-Rail Mounting
Isolation 3750 VRMS
PoE yes
Type Open CollectorWet Contact
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, PoE
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 1.0 W
Dimensions (mm) 52 x 95 x 27 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 to 90% RH, Non-condensing
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 2
Input Impedance 10 kΩ
Overvoltage Protection +48 VDC+70 VDC
Powered from Terminal Block +12 to +48 VDC
Sink/Source (NPN/PNP) Sink/SourceSource
ON Voltage Level +10 to +50 VDC
OFF Voltage Level +4 VDC (max.)
Load Voltage +10 to +40 VDC
Load Current 650 mA/channel
Protocol Modbus TCP, Modbus UDP, and MQTT
Powered from PoE IEEE 802.3af, Class 1
Frequency 3.5 kHz (without filter)
EFT (IEC 61000-4-4) ±4 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 0.15 ms
Access Control Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module provides digital input and output over the network and is designed for industrial monitoring and control. The module supports PoE, which greatly simplifies installation, and can be accessed via a web server or standard protocols.


2 x Digital Input · 2 x Open Collector Output · PoE IEEE 802.3af · Modbus TCP/UDP and MQTT


Features that make the difference

  • PoE power supply - eliminates the need for a separate power source
  • Built-in web server - easy configuration and monitoring without extra software
  • High isolation of 3750 Vrms - protects against electrical disturbances
  • Access control - password and IP filter secure network access
  • Wide operating temperature - reliable performance in demanding industrial environments


Applications

The module is suitable for remote monitoring and control in industrial networks where space and wiring are limited.

  • Factory automation
  • Building management
  • Remote monitoring of sensors and contacts
  • Control of pumps and valves


A compact and robust solution for reliable I/O control over Ethernet with PoE.