Item number ETHER-MODUL-2X-DIGIT

Ethernet I/O Module with 2x Digital Input, 2x PhotoMOS Relay Output, PoE

2 x Digital Input, Wet Contact
2 x PhotoMOS Relay Output, Form A
Modbus TCP, Modbus UDP, MQTT
1 x RJ45 10/100 Base-Tx, PoE
Built-in Web Server
Password and IP Filter Access Control
Isolation 3750 Vrms Input / 3000 Vrms Output
PoE IEEE 802.3af Class 1 or 12-48VDC
DIN-Rail mounting
52 x 95 x 27 mm
-25 to +75C (special components required)

139.36 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit MCU
Installation DIN-Rail Mounting
Isolation 3000 VRMS3750 VRMS
PoE yes
Type PhotoMOS Relay, Form AWet Contact
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, PoE
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 1.0 W
Dimensions (mm) 52 x 95 x 27 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 to 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 2
Input Impedance 10 kΩ
Overvoltage Protection +70 VDC
Powered from Terminal Block +12 to +48 VDC
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +10 to +50 VDC
OFF Voltage Level +4 VDC (max.)
Protocol Modbus TCP, Modbus UDP, and MQTT
Powered from PoE IEEE 802.3af, Class 1
Contact Rating 60V/1.0A (Operating Temperature -25 to +40°C)60V/0.8A (Operating Temperature +40 to +60°C)60V/0.7A (Operating Temperature +60 to +75°C)
Operate Time 1.3 ms (Typical)
Release Time 0.1 ms (Typical)
Electrical Endurance Long Life and No Sparking
Frequency 3.5 kHz (without filter)
EFT (IEC 61000-4-4) ±4 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 0.15 ms
Access Control Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module enables remote control and monitoring of digital signals over the network. It is designed for industrial applications requiring reliable I/O communication via Modbus or MQTT.


2 x Digital Input · 2 x PhotoMOS Relay Output · PoE · Modbus TCP/UDP, MQTT


Features that make the difference

  • PhotoMOS relays -long life and spark-free operation
  • PoE power supply -simple installation with a single cable
  • Built-in web server -easy configuration without extra software
  • High isolation -up to 3750 Vrms protects against noise and overvoltage
  • Wide operating temperature -reliable operation from -25 to +75°C


Application areas

The module is well suited for monitoring and control in industrial environments where robustness and network integration are essential.

  • Factory automation
  • Building management
  • Remote equipment monitoring
  • DIN-rail installations in cabinets


A robust and flexible choice for digital I/O over Ethernet with PoE support.