Item number ETH-DIG-4OUT-POE

Ethernet Digital Output Module 4-Ch, PoE, Modbus TCP/UDP, MQTT

4 x Digital Output, Open Collector

Source type, 650 mA/channel

Load voltage +10 to +40VDC

Overvoltage protection +48VDC

Short-circuit protection

Isolation 3750 Vrms

1 x RJ45 10/100 Base-Tx, PoE

Modbus TCP, Modbus UDP, MQTT

Built-in web server

12-48VDC or PoE IEEE 802.3af

52 x 95 x 27 mm

-25° to 75°C

140.03 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit MCU
Installation DIN-Rail Mounting
Isolation 3750 VRMS
PoE yes
Type Open Collector
Drifttemperatur -25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, PoE
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 1.0 W
Dimensions (mm) 52 x 95 x 27 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 to 90% RH, Non-condensing
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 4
Overvoltage Protection +48 VDC
Powered from Terminal Block +12 to +48 VDC
Sink/Source (NPN/PNP) Source
Load Voltage +10 to +40 VDC
Load Current 650 mA/channel
Protocol Modbus TCP, Modbus UDP, and MQTT
Powered from PoE IEEE 802.3af, Class 1
EFT (IEC 61000-4-4) ±4 kV for Power Line
Access Control Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module provides 4 digital output channels over a network connection and is used for remote control of actuators, relays, and other industrial equipment. The module supports PoE, which significantly simplifies installation.

4 x Digital Output · PoE IEEE 802.3af · Modbus TCP/UDP & MQTT · DIN-Rail Mounting

Robust Features for Industrial Operation

  • Open Collector output - flexible control of external loads up to 650 mA per channel
  • Overvoltage and short-circuit protection - protects the module against fault conditions
  • 3750 Vrms galvanic isolation - ensures stable operation and protects against noise
  • Built-in web server - easy configuration and monitoring without extra software
  • PoE power supply - receives both data and power over a single network cable

Application Areas

The module is well suited for industrial automation and monitoring tasks where digital output control needs to be handled over Ethernet.

  • Control of relays and actuators
  • Remote monitoring of production facilities
  • Building automation
  • SCADA and PLC integration via Modbus

A reliable choice for robust and flexible digital output control in industrial Ethernet networks.