Item number ETHER-ANALO-INPUT-MODUL-13

Ethernet Analog Input Module, 2-CH Voltage/Current, 16-bit, Modbus TCP/MQTT

2 x Analog Input, Voltage/Current
16-bit resolution
Sampling up to 200 Hz (Fast Mode)
Accuracy +/-0.1% FSR (Normal Mode)
Modbus TCP, Modbus UDP, MQTT, SNMP V2c
1 x RJ45 10/100 Base-Tx
Built-in Web Server
Isolation Ethernet 1500VDC, I/O 3000VDC
DIN-Rail mounting
12-48VDC, 1.0W
52 x 96 x 27 mm
25 to 75C (special components required)

160.80 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit MCU
Installation DIN-Rail Mounting
Type Voltage, Current
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range Voltage: 0 ~ 500 mV, 0 ~ 1 V, 0 ~ 2.5 V, 0 ~ 5 V, 0 ~ 10 VCurrent: 0 ~ +20 mA, +4 ~ +20 mA
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 1.0 W
Dimensions (mm) 52 x 96 x 27 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 to 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 2 Single-ended
Accuracy Normal Mode: ±0.1% of FSRFast Mode: ±0.5% of FSR
Sampling Rate Normal Mode: 10 Hz (total channels)Fast Mode: 200 Hz (total channels)
Input Impedance Voltage: 10 MΩCurrent: 137 Ω
Overvoltage Protection 120 VDC
Powered from Terminal Block +12 to +48 VDC
Overcurrent Protection 50 mA at 110 VDC
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP, MQTT, and SNMP V2c
Open Wire Detection For 4 to 20 mA only
2-way Isolation Ethernet: 1500 VDCI/O: 3000 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Access Control Password and IP Filter
Built-in Web Server Yes

Ethernet Analog Input Module

This Ethernet analog input module enables voltage and current measurement across two isolated channels, designed for industrial data acquisition and process monitoring. The module communicates via standard Ethernet protocols and integrates seamlessly into existing network infrastructure.


2 x Analog Input · 16-bit resolution · Modbus TCP/MQTT · 12-48VDC


Features for reliable measurement

  • High resolution - 16-bit AD conversion for precise readings
  • Dual measurement mode - Normal Mode for high accuracy, Fast Mode for sampling up to 200 Hz
  • Galvanic isolation - 1500 VDC on Ethernet and 3000 VDC on I/O protects against noise and transients
  • Built-in web server - Easy configuration and monitoring directly via browser
  • Robust protection - Overvoltage and overcurrent protection plus EFT/ESD protection per IEC standards


Application areas in industry

The module is well suited for monitoring analog sensor signals in production plants, building automation, and process industries, where stable and accurate data acquisition is critical.

  • Process monitoring in production plants
  • Sensor integration in SCADA systems
  • Automated data acquisition in DIN-Rail installations
  • Remote monitoring via Modbus/MQTT networks


With high resolution, robust isolation, and flexible network protocols, this module is a reliable choice for industrial analog signal processing.