Item number CHANN-ANALO-OUTPU-MODUL-8

2-Channel Analog Output Module, Ethernet PoE, Modbus TCP/MQTT

2 x Analog Output: Voltage / Current
Voltage: 0-10V, Current: 0/4-20mA
12-bit resolution, +/-0.1% FSR
Modbus TCP/UDP, MQTT, SNMP v2c
1 x RJ45 10/100 PoE (802.3af Class 1)
Open wire detection (4-20mA)
2-way isolation 3000VDC
Programmable watchdog timer
DIN-rail mounting
12-48VDC or PoE powered
52 x 96 x 27 mm
25 to 75C (special components required)

184.92 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit MCU
Installation DIN-Rail Mounting
PoE yes
Type Voltage, Current
Operating Temperature 25 ~ +75 °C
Resolution 12-bit
Range Voltage: 0 ~ 10 VCurrent: 0 ~ +20 mA, +4 ~ +20 mA
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, PoE
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 2.2 W
Dimensions (mm) 52 x 96 x 27 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 to 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 2
Accuracy ±0.1% of FSR
Programmable Output Slope Voltage: 0.0625 ~ 512 V/SecondCurrent: 0.125 ~ 1024 mA/Second
Voltage Output Capability 10 V @ 10 mA
Current Load Resistance 500 Ω
Power-on Value Programmable
Safe Value Programmable
Powered from Terminal Block +12 to +48 VDC
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP, MQTT, and SNMP V2c
Open Wire Detection For 4 to 20 mA only
Powered from PoE IEEE 802.3af, Class 1
2-way Isolation I/O: 3000 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Access Control Password and IP Filter
Built-in Web Server Yes

Analog Output Module

This analog output module enables precise control of voltage and current signals over Ethernet. It is designed for industrial automation applications requiring reliable and flexible analog signal control.


2 Channels · 0-10V / 0-20mA · PoE · Modbus TCP/MQTT


Features that make the difference

  • 12-bit resolution - accurate control of analog outputs
  • Isolated I/O - 3000 VDC isolation protects against noise and transients
  • PoE powered - simplifies installation without a separate power cable
  • Open wire detection - monitors 4-20 mA loop for faults
  • Programmable safe value - defines output behavior on startup or fault


Application areas

The module is suited for tasks where analog signals need to be reliably controlled over a network.

  • Process automation
  • Building automation
  • Remote actuator control
  • Monitoring in industrial plants


A robust and flexible solution for precise analog output control via Ethernet.