Item number ETHER-MODUL-3X-ANALO-2

Ethernet I/O Module, 3x Analog Input, 6x DI, 3x Relay Output

3 x Isolated Analog Input, 16-bit
Voltage/Current, Jumper Selectable
6 x Digital Input, Wet Contact
Sink/Source, Counter up to 32-bit
3 x Power Relay Output (SPST N.O.)
5A @ 250VAC/24VDC Contact Rating
Modbus TCP/UDP Protocol
Built-in Web Server
Programmable Watchdog Timer
10-30VDC Power Input
72 x 123 x 35 mm
-25 to 75C (special components required)

372.52 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
Type Power Relay, Form A (SPST N.O.)VoltageCurrentWet Contact
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V0 ~ 20 mA, ±20 mA, 4 ~ 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 2.9 W (max.)
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 633 (Differential)
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Hz (total channels)Fast Mode: 50 Hz (total channels)
Input Impedance Voltage: 2 MΩCurrent: 125 Ω10 kΩ, 0.5W
Overvoltage Protection 240 Vrms+70 VDC
Safe Value Programmable
Powered from Terminal Block +10 ~ +30 VDC
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +10 ~ +50 VDC
OFF Voltage Level +4 VDC (max.)
Power on Value Programmable
Overcurrent Protection 50 mA @ 110 VDC (max.)
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP
Open Wire Detection For 4 ~ 20 mA only
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Operate Time 6 ms (Typical)
Release Time 3 ms (Typical)
Electrical Endurance 10^5 ops.
Mechanical Endurance 2 × 10^7 ops.
Frequency 100 Hz
2-way Isolation Ethernet: 1500 VDCI/O: 2500 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 5 ms
Access Control ID, Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module is designed for industrial data acquisition and control via Modbus TCP/UDP. It combines isolated analog inputs, digital inputs and relay outputs in a compact DIN-rail unit suitable for automation tasks.


3x Analog Input · 6x Digital Input · 3x Relay Output · Modbus TCP/UDP


Features for reliable operation

  • Isolated analog inputs -protects against noise and voltage differences
  • 16-bit resolution -delivers accurate measurements with high precision
  • Jumper selectable signal -flexible configuration of voltage or current
  • Programmable watchdog -ensures stable operation during communication faults
  • Built-in web server -easy configuration and monitoring without extra software


Application areas in industry

The module fits monitoring and control of processes where reliable data acquisition is essential.

  • Process monitoring
  • Building automation
  • Machine control
  • Remote sensor monitoring


A robust and flexible choice for industrial I/O over Ethernet.