Item number ETHER-MODUL-3X-ANALO

Ethernet I/O Module with 3x Analog Input, 6x Digital Input, 3x Relay Output, PoE

3x Isolated Analog Input, 16-bit
Voltage/Current, +-150mV to +-10V
0-20mA, +-20mA, 4-20mA ranges
6x Digital Input, Wet Contact
32-bit Counter, 100 Hz Frequency
3x Power Relay Output, 5A
1x RJ-45 10/100 Base-TX, PoE
Modbus TCP/UDP Protocol
Built-in Web Server
PoE IEEE 802.3af or 12-48VDC
72 x 123 x 35 mm
25 to 75C Operating Temperature

397.98 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
PoE yes
Type Wet ContactVoltageCurrentPower Relay, Form A (SPST N.O.)
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V 0 ~ 20 mA, ±20 mA, 4 ~ 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, PoE
Ports 1 x RJ-45, 10/100 Base-TX
Consumption 3.4 W (max.)
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 33 (Differential)6
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Hz (total channels)Fast Mode: 50 Hz (total channels)
Input Impedance 10 kΩ, 0.5WVoltage: 2 MΩCurrent: 125 Ω
Overvoltage Protection +70 VDC240 Vrms
Safe Value Programmable
Powered from Terminal Block +12 ~ +48 VDC
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +10 ~ +50 VDC
OFF Voltage Level +4 VDC (max.)
Power on Value Programmable
Overcurrent Protection 50 mA @ 110 VDC (max.)
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP
Open Wire Detection For 4 ~ 20 mA only
Powered from PoE IEEE 802.3af, Class1
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Operate Time 6 ms (Typical)
Release Time 3 ms (Typical)
Electrical Endurance 10^5 ops.
Mechanical Endurance 2 × 10^7 ops.
Frequency 100 Hz
2-way Isolation I/O: 2500 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 5 ms
Access Control ID, Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module combines analog and digital inputs with relay outputs in a compact DIN-rail unit. It is well suited for industrial monitoring and control via Modbus TCP/UDP and can be powered directly via PoE. The module is designed for robust operation in demanding industrial environments.


3x Analog Input 16-bit · 6x Digital Input · 3x Relay Output · PoE and Modbus TCP


Features that make the difference

  • High resolution -16-bit analog conversion for precise measurements
  • Flexible signal types -jumper-selectable voltage and current ranges
  • Galvanic isolation -2500 VDC I/O isolation protects against noise and overvoltage
  • PoE operation -receives both data and power over a single network cable
  • Built-in web server -easy configuration and monitoring without extra software


Application areas

The module suits tasks where analog and digital signals must be collected and relays controlled simultaneously over a network.

  • Industrial process control
  • Building automation
  • Remote sensor monitoring
  • Machine control via Modbus


A robust and flexible solution for combined analog/digital I/O over Ethernet with PoE support.