Item number ETHER-MODUL-DI-DO-3

Ethernet I/O Module with 8 DI, 8 DO, OPC UA/MQTT and PoE

OPC UA Server/Client, MQTT Client
8 x Digital Input, Wet Contact
8 x Isolated Open Collector Output
2 x RJ45 10/100 PoE Ports
LAN Bypass Support
32-bit CPU 400MHz
Programmable Watchdog Timer
2500VDC I/O Isolation
PoE 802.3af Class3, 12-48VDC
97 x 120 x 47 mm
-25~75C (special components required)

Call +45 56 66 20 20 for price
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit CPU (400 MHz)
Installation DIN-Rail Mounting
PoE yes
Type Isolated Open CollectorWet Contact
Operating Temperature -25 °C ~ +75 °C
Watchdog Timer Module,Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 6 W
Dimensions (mm) 97 x 120 x 47 (W x L x H)
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 8
Input Impedance 10 kΩ
Overvoltage Protection +70 VDC+47 VDC
Safe Value Programmable
Powered from Terminal Block +12 ~ +48 VDC
Sink/Source (NPN/PNP) Sink/SourceSource
ON Voltage Level +10 ~ +50 VDC
OFF Voltage Level +4 VDC (max.)
Load Voltage +10 ~ +40 VDC
Load Current 650 mA/channel at 25°C
Power on Value Programmable
Protocol • OPC UA Server / Client• MQTT Client• RESTful API
Powered from PoE IEEE 802.3af, Class3
Frequency 100 Hz
Function • Web Interface for Configuration• Scaling• Security• Rule Setting• Schedule• Event Log• IoTstar Setting
2-way Isolation I/O: 2500 VDC
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 5 ms
LAN bypass Yes
Access Control ID, Password and IP Filter

Ethernet I/O Module

This Ethernet I/O module combines digital input and output channels with built-in OPC UA Server and MQTT Client services for direct integration into industrial IoT and SCADA systems. It is designed for reliable remote monitoring and control over standard Ethernet networks.


8 x Digital Input · 8 x Digital Output · OPC UA / MQTT · PoE Powered


Key Features

  • OPC UA Server/Client - enables secure, standardized data exchange with SCADA and IoT platforms
  • MQTT Client - supports lightweight publish/subscribe communication for IoT applications
  • PoE Support - powered directly via the Ethernet cable, IEEE 802.3af Class 3
  • LAN Bypass - maintains network connectivity even if the module loses power
  • Wide Operating Temperature - operates reliably from -25 to +75C (special components required)


Typical Applications

The module suits industrial automation and remote monitoring tasks where robust digital I/O and network-based control are required.

  • Factory automation and machine monitoring
  • Remote environmental and equipment monitoring
  • Building and infrastructure automation
  • IoT data acquisition at the network edge


A robust, PoE-powered I/O solution built for direct integration with modern IoT and SCADA platforms.