Item number POE-ETHER-MODUL-OPC

PoE Ethernet I/O Module with OPC UA Server, MQTT, 3 AI, 6 DI, 3 Relay Output

OPC UA Server, MQTT Client, RESTful API
3 x Analog Input, 16-bit
6 x Digital Input, Wet Contact
3 x Relay Output 5A @ 250VAC/24VDC
2 x RJ45 10/100 PoE Switch Ports
Web Interface Configuration
2-way Isolation 2500 VDC
DIN-Rail Mounting
12-48VDC, PoE 802.3af Class 3
97 x 120 x 47 mm
-25 to +75C (special components req)

Call +45 56 66 20 20 for price
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit CPU (400 MHz)
Installation DIN-Rail Mounting
Isolation ±400 VDC, Virtual Channel to Channel Isolation
PoE yes
Type Wet ContactPower Relay, Form A (SPST N.O.)Voltage, Current
Operating Temperature -25 °C ~ +75 °C
Resolution 16-bit
Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V 0 to 20 mA, ±20 mA, 4 to 20 mA(Jumper Selectable)
Watchdog Timer Module, Communication(Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 6.6 W
Dimensions (mm) 97 x 120 x 47 (W x L x H)
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 633 (Differential)
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 samples/second (Total)Fast Mode: 50 samples/second (Total)
Input Impedance Voltage: 2 MΩCurrent: 125 Ω10 kΩ, 0.5W
Overvoltage Protection 240 Vrms+70 VDC
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Safe Value Programmable
Powered from Terminal Block +12 to +48 VDC
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +10 ~ +50 VDC
OFF Voltage Level +4 VDC (max.)
Power on Value Programmable
Common Mode Rejection 86 dB (min.)
Normal Mode Rejection 100 dB
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Protocol • OPC UA Server / Client• MQTT Client• RESTful API
Open Wire Detection Yes
Powered from PoE IEEE 802.3af, Class3
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Operate Time 6 ms (Typical)
Release Time 3 ms (Typical)
Electrical Endurance 10^5 ops.
Mechanical Endurance 2 × 10^7 ops.
Frequency 100 Hz
Function • Web Interface for Configuration• Scaling• Security• Rule Setting• Schedule• Event Log• IoTstar Setting
2-way Isolation I/O: 2500 VDC
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
Min. Pulse Width 5 ms
LAN bypass Yes
Access Control ID, Password and IP Filter

Ethernet I/O Module

This Ethernet I/O module combines analog and digital inputs with relay outputs in a compact DIN-rail unit. It is designed for industrial monitoring and control applications that require direct integration with OPC UA and MQTT based systems.


3 x Analog Input · 6 x Digital Input · 3 x Relay Output · OPC UA / MQTT


Built-in Communication and Control Features

  • OPC UA Server - direct connection to SCADA and MES systems without extra gateways
  • MQTT Client - lightweight data publishing for IoT and cloud platforms
  • PoE Powered - simplifies installation with a single Ethernet cable for power and data
  • 2-way Isolation - 2500 VDC I/O isolation protects the module from voltage spikes
  • Wide Operating Temperature - reliable operation from -25C to +75C (special components required)


Typical Applications

The module fits well into distributed monitoring systems where analog and digital signals must be converted to Ethernet based protocols.

  • Factory automation and process monitoring
  • Remote sensor and actuator control
  • Energy and utility monitoring
  • Building and infrastructure automation


A robust, PoE-powered I/O module that brings OPC UA and MQTT connectivity directly to the field level.