Item number CO-CO2-PM2-TEMPE-2

CO/CO2/PM2.5/Temperature/Humidity Sensor with WiFi and Ethernet

PM1/PM2.5/PM10, CO, CO2, RH, Temp Alarm
Data Logger up to 450,000 records
Real Time Clock
CO2 (NDIR): 0-9999 ppm, +/-40ppm +/-3%
CO (Electrochemical): 0-1000 ppm
PM2.5 (Laser): 0-1000 ug/m3
Temp: 10-50C, +/-0.6C accuracy
Humidity: 0-100% RH, +/-5% accuracy
IEEE 802.11 b/g/n WiFi, WEP/WPA/WPA2
RS-485 and 10/100 Ethernet RJ-45
Modbus RTU/TCP, DCON, MQTT
12-48VDC, ceiling/wall mount, IP20

793.28 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Alarm PM1/PM2.5/PM10/CO/CO2/RH/Temperature
Installation Ceiling Mounting/Wall Mounting
Operating Temperature 0 ~ 50°C
Resolution 0.1°C1μg/m31 ppm0.1% RH, Non-condensing
Range Calculated using temperature and relative humidity10 ~ +50°C0 to 9999 ppm (NDIR)0 to 1,000μg/m3 ( Laser Type)0 to 1000 ppm (Electrochemical)0 ~ 100% RH, Non-condensing
Encryption WEP, WPA and WPA2
Real Time Clock Yes
Ports 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicators)1 x RS-4851 x Ethernet
Consumption Non-PoE: 2.5 W (Max.)PoE: 2.7 W (Max.)
Dimensions (mm) Ø 150 x 53 (Ø x H)
Storage Temperature 30 ~ +75°C
Humidity 10 ~ 90% RH, Non-condensing
Channels 1 x Form A, SPST30 VDC @ 16 A or 250 VAC @ 16 A
Accuracy ±5% of measured value±5% RH, Non-condensing±0.6°C± 10% of FSR.±40 ppm ±3% of measured value
Response Time 30 seconds1 seconds120 seconds
Powered from Terminal Block +12 ~ +48 VDC
Protocol DCON and Modbus/RTU (RS-485)Modbus TCP(Ethernet, Wi-Fi) and MQTT(Ethernet)
Mode Infrastructure & Limited AP
Ingress Protection Rating IP20
Antenna 1 dBi (PCB Antenna)
RX Sensitivity 95.7 dBm @ 1 DSSS, -74.0 dBm @ 54 OFDM
Transmission Distance (LoS) 50 meters (LOS)
Output Power 18 dBm @ 1 DSSS, 14.5 dBm @ 54 OFDM
Security IP filter (whitelist) and Password (web)
Standard Supported IEEE 802.11 b/g/n
Data Logger Yes, up to 450,000 records
Life Time 10 years15 years5 years, Customer has to replace the filter patch.5 years
Warm-up Time 20 seconds5 minutes
Sizes 0.3μm, 0.5μm, 1μm, 2.5μm, 5μm, 10μm

Environmental Sensor for CO, CO2, PM2.5, Temperature and Humidity

This environmental sensor simultaneously measures CO, CO2, particulate matter (PM1/PM2.5/PM10), temperature and relative humidity. It is well suited for indoor air quality monitoring in offices, schools and industrial environments where continuous documentation is required.


CO2 up to 9999 ppm · Laser PM2.5 sensor · Data logger 450,000 records · WiFi and Ethernet


Features that ensure accurate monitoring

  • Multi-sensor measurement - CO, CO2, PM1/PM2.5/PM10, temperature and humidity in one unit
  • Built-in data logger - stores up to 450,000 readings for later analysis
  • Real time clock - timestamps every logged reading precisely
  • Flexible communication - supports Modbus RTU, Modbus TCP, DCON and MQTT over RS-485, Ethernet and WiFi
  • Alarm function - triggers on threshold values for PM, CO, CO2, RH and temperature


Applications

The sensor is designed for ceiling or wall mounting in buildings and industrial facilities where continuous air quality monitoring is needed.

  • Indoor air quality monitoring in offices and schools
  • Industrial process control and safety
  • Building management systems (BMS)
  • Air quality control in ventilation systems


A complete solution for accurate and reliable air quality and indoor climate monitoring.