Item number WI-FI-ETHER-MODUL-2

Wi-Fi Ethernet I/O Module, 1 x Wet Contact Input, 1 x Relay Output, PoE

IEEE 802.11 b/g/n Wi-Fi, 5 dBi antenna
Modbus RTU/TCP and MQTT support
1 x Wet Contact Digital Input
1 x Power Relay Output 5A 250VAC
10/100 Base-TX RJ45 Port
Built-in Web Server
IP filter and Password Security
PoE IEEE 802.3af Class 1
Terminal Block +10-48VDC, PoE
-25 to 75C (special components required)
33 x 108 x 127 mm
DIN-Rail Mounting

238.52 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 3750 VDC
Type Wet ContactPower Relay, Form A (SPST N.O.)
Operating Temperature 25 ~ +75 °C
Encryption WEP, WPA and WPA2
Watchdog Timer Yes, Module (2.3 seconds), Communication (Programmable)
Status S1: System indicatorE1: PoE indicator (Green)Link/Act (Yellow)Antenna: Signal Strength
Ports 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicators)
Input Range Terminal Block: +10 ~ +48 VDCPoE: IEEE 802.3af, Class 1
Consumption PoE: 1.2 W Max.Non-PoE: 1 W Max.
Dimensions (mm) 33 x 108 x 127 (W x L x H)
Storage Temperature 30 ~ +80°C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 16
Input Impedance 150 KΩ, 2 W
Overvoltage Protection 300 VAC
Safe Value Yes, Programmable
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level 80 VAC ~240 VAC
OFF Voltage Level 30 VAC Max.
Power on Value Yes, Programmable
Baud Rate 1200 ~ 115200 bps
Protocol Modbus/RTU(RS-485), Modbus TCP(Ethernet, Wi-Fi) and MQTT(Ethernet)
Mode Infrastructure & Limit-AP
Contact Rating 5 A @ 250 VAC or 5 A @ 30 VDC
Operate Time 6 ms
Release Time 3 ms
Electrical Endurance VDE:5 A @ 250 VAC 30,000 ops (10 ops/minute) at 75°C5 A @ 30 VDC 70,000 ops (10 ops/minute) at 75°CUL: 5 A @ 250 VAC/30 VDC 6,000 ops3 A @ 250 VAC/30 VDC 100,000 ops
Mechanical Endurance 20,000,000 ops at no load (300 ops/minute)
Antenna 5 dBi (Omni-Directional)
RX Sensitivity 83 dBm @ 11 Mbps
Transmission Distance (LoS) 50 meters (LOS)
EFT (IEC 61000-4-4) ±2 kV for Power
Output Power 8 dBm @ 11 Mbps
Built-in Web Server Yes
Security IP filter (whitelist) and Password (web)
Standard Supported IEEE 802.11 b/g/n
Max. Stack Light Flashing Speed 60 Hz
Report Duration of Previous Status Yes, 10 ~ 65500 ms

Wi-Fi Ethernet I/O Module

This Wi-Fi Ethernet I/O module enables wireless monitoring and control of digital signals in industrial environments. It combines a wet contact digital input with a relay output and supports both wired and wireless communication via Modbus and MQTT.


IEEE 802.11 b/g/n Wi-Fi · Modbus RTU/TCP and MQTT · PoE IEEE 802.3af · -25 to 75°C


Features that make the difference

  • Wireless connectivity - Wi-Fi 802.11 b/g/n with 5 dBi antenna for flexible placement
  • Flexible protocol support - Modbus RTU, Modbus TCP and MQTT in one device
  • PoE powered - receives power directly through the Ethernet cable
  • Built-in web server - easy configuration and monitoring via browser
  • Rugged design - high isolation and ESD/EFT protection for demanding environments


Applications

The module is well suited for remote monitoring and control where cabling is difficult or undesirable.

  • Remote monitoring of machine status
  • Control of signal towers and alarms
  • Wireless data collection in industrial plants
  • Integration into SCADA and automation systems


A reliable choice for wireless I/O control with wide temperature tolerance and flexible protocol support.