Item number WI-FI-ETHER-MODUL

Wi-Fi Ethernet I/O Module, 1 x DI, 1 x Relay Output, PoE

Wi-Fi IEEE 802.11 b/g/n, 5 dBi Antenna
1 x Digital Input (Wet Contact)
1 x Power Relay Output 5A 250VAC
Modbus RTU/TCP and MQTT Protocol
10/100 Base-TX RJ45 Port
Built-in Web Server
WEP, WPA, WPA2 Encryption
Watchdog Timer, IP Filter Security
10-48VDC, PoE 802.3af Class 1
33 x 108 x 127 mm
-25 to +75C (special components required)

238.52 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 3750 VDC
Type Wet ContactPower Relay, Form A (SPST N.O.)
Operating Temperature 25 ~ +75 °C
Encryption WEP, WPA and WPA2
Watchdog Timer Yes, Module (2.3 seconds), Communication (Programmable)
Status S1: System indicatorE1: PoE indicator (Green)Link/Act (Yellow)Antenna: Signal Strength
Ports 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicators)
Input Range Terminal Block: +10 ~ +48 VDCPoE: IEEE 802.3af, Class 1
Consumption PoE: 1.2 W Max.Non-PoE: 1 W Max.
Dimensions (mm) 33 x 108 x 127 (W x L x H)
Storage Temperature 30 ~ +80°C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 16
Input Impedance 10 KΩ, 0.5 W
Overvoltage Protection 70 VDC
Safe Value Yes, Programmable
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +10 VDC ~ 50 VDC
OFF Voltage Level +4 V Max.
Power on Value Yes, Programmable
Baud Rate 1200 ~ 115200 bps
Protocol Modbus/RTU(RS-485), Modbus TCP(Ethernet, Wi-Fi) and MQTT(Ethernet)
Mode Infrastructure & Limit-AP
Contact Rating 5 A @ 250 VAC or 5 A @ 30 VDC
Operate Time 6 ms
Release Time 3 ms
Electrical Endurance VDE:5 A @ 250 VAC 30,000 ops (10 ops/minute) at 75°C5 A @ 30 VDC 70,000 ops (10 ops/minute) at 75°CUL: 5 A @ 250 VAC/30 VDC 6,000 ops3 A @ 250 VAC/30 VDC 100,000 ops
Mechanical Endurance 20,000,000 ops at no load (300 ops/minute)
Antenna 5 dBi (Omni-Directional)
RX Sensitivity 83 dBm @ 11 Mbps
Transmission Distance (LoS) 50 meters (LOS)
EFT (IEC 61000-4-4) ±2 kV for Power
Output Power 8 dBm @ 11 Mbps
Built-in Web Server Yes
Security IP filter (whitelist) and Password (web)
Standard Supported IEEE 802.11 b/g/n
Max. Stack Light Flashing Speed 3 kHz
Report Duration of Previous Status Yes, 10 ~ 65500 ms

Wi-Fi Ethernet I/O Module

This Wi-Fi Ethernet I/O module provides wireless monitoring and control of digital signals in industrial environments. It combines a digital input and relay output with support for Modbus and MQTT, making it suitable for remote monitoring and automation. The rugged design makes it ideal for demanding installations requiring reliable wireless connectivity.


Wi-Fi 802.11 b/g/n · 1 x DI, 1 x Relay · Modbus & MQTT · PoE 802.3af


Features that make the difference

  • Wireless connectivity - Wi-Fi 802.11 b/g/n with 5 dBi antenna for flexible installation
  • Built-in web server - easy configuration and monitoring directly via browser
  • Security - IP filtering (whitelist) and password protection
  • Rugged design - operates from -25 to +75°C with high 3750 VDC isolation
  • Flexible power supply - supports both PoE and terminal block power 10-48 VDC


Application areas

The module is well suited for monitoring and control in industrial and building automation installations where cabling is difficult or impractical.

  • Remote monitoring of machines and processes
  • Building automation and alarm systems
  • Wireless control of pumps and valves
  • Integration into SCADA and Modbus-based systems


A reliable choice for wireless I/O control in demanding industrial environments.