Item number ETHIO-4DI-1R

Ethernet I/O Module 4x Digital Input, 1x Relay Output, PoE

4 x Digital Input (Wet Contact)
1 x Power Relay Output (SPST N.O.)
Relay: 5A @ 250VAC or 5A @ 30VDC
Modbus/RTU, Modbus TCP, MQTT
10/100 Base-TX RJ45 Ethernet
PoE IEEE 802.3af Class 1
Built-in Web Server
Watchdog Timer, IP Filter, Password
10-48VDC or PoE Input
52 x 98 x 27 mm
-25 to +75C (special components required)

143.38 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 3750 VDC
Type Wet ContactPower Relay, Form A (SPST N.O.)
Operating Temperature 25 ~ +75 °C
Watchdog Timer Yes, Module (2.3 seconds), Communication (Programmable)
Status S1: System indicatorE1: PoE indicator (Green)Link/Act (Yellow)
Ports 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicators)
Input Range Terminal Block: +10 ~ +48 VDCPoE: IEEE 802.3af, Class 1
Consumption PoE: 1 W Max.Non-PoE: 0.9 W Max.
Dimensions (mm) 52 x 98 x 27 (W x L x H)
Storage Temperature 30 ~ +80°C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 41
Input Impedance 150 KΩ, 2 W
Overvoltage Protection 300 VAC
Safe Value Yes, Programmable
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level 80 VAC ~240 VAC
OFF Voltage Level 30 VAC Max.
Low Pass Filter 0 ~ 6500 ms, programmable
Power on Value Yes, Programmable
Baud Rate 1200 ~ 115200 bps
Protocol Modbus/RTU, Modbus TCP and MQTT
Contact Rating 5 A @ 250 VAC or 5 A @ 30 VDC
Operate Time 6 ms
Release Time 3 ms
Electrical Endurance VDE:5 A @ 250 VAC 30,000 ops (10 ops/minute) at 75°C5 A @ 30 VDC 70,000 ops (10 ops/minute) at 75°CUL: 5 A @ 250 VAC/30 VDC 6,000 ops3 A @ 250 VAC/30 VDC 100,000 ops
Mechanical Endurance 20,000,000 ops at no load (300 ops/minute)
EFT (IEC 61000-4-4) ±2 kV for Power
Built-in Web Server Yes
Security IP filter (whitelist) and Password (web)
Max. Stack Light Flashing Speed 60 Hz
Report Duration of Previous Status Yes, 10 ~ 65500 ms

Ethernet I/O Module

This Ethernet I/O module is designed for industrial monitoring and control, combining digital inputs with a relay output for reliable process management. It supports both Modbus and MQTT and can be powered via PoE, greatly simplifying installation.

4 x Digital Input · 1 x Relay Output · PoE IEEE 802.3af · -25 to +75°C

Features that ensure stable operation

  • Built-in Web Server -easy configuration without extra software
  • Watchdog Timer -automatic recovery from communication failures
  • IP Filter and Password -protects against unauthorized access
  • PoE Support -power and data over a single cable
  • Wide Operating Temperature -reliable in demanding industrial environments

Application areas in industry

The module suits applications where status needs monitoring and relay control must be triggered remotely over the network.

  • Machine status monitoring
  • Remote control of pumps and valves
  • Alarm systems in production
  • Integration into SCADA systems

A robust and flexible choice for industrial I/O control over Ethernet.