Item number CO-CO2-PM2-TEMPE

CO/CO2/PM2.5/Temperature/Humidity Sensor with WiFi, Ethernet and RS-485

CO, PM1/PM2.5/PM10, Temp and RH sensing
Temp range 10-50C, accuracy 0.6C
Humidity range 0-100% RH, accuracy 5%
CO range 0-1000ppm, electrochemical
PM range 0-1000ug/m3, laser type
Wi-Fi 802.11 b/g/n, 50m LOS range
1x RS-485, 1x 10/100 Ethernet RJ-45
Modbus RTU/TCP, DCON, MQTT protocols
Data logger up to 450000 records
Real time clock and alarm outputs
12-48VDC, ceiling or wall mount
150 x 53 mm (Dia x H), IP20

586.92 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Alarm PM1/PM2.5/PM10/CO/RH/Temperature
Installation Ceiling Mounting/Wall Mounting
Operating Temperature 0 ~ 50°C
Resolution 1 ppm0.1% RH, Non-condensing0.1°C1μg/m3
Range 0 to 1,000μg/m3 ( Laser Type)0 to 1000 ppm (Electrochemical)Calculated using temperature and relative humidity10 ~ +50°C0 ~ 100% RH, Non-condensing
Encryption WEP, WPA and WPA2
Real Time Clock Yes
Ports 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicators)1 x RS-4851 x Ethernet
Consumption Non-PoE: 2.4 W (Max.)PoE: 2.6 W (Max.)
Dimensions (mm) Ø 150 x 53 (Ø x H)
Storage Temperature 30 ~ +75°C
Humidity 10 ~ 90% RH, Non-condensing
Channels 1 x Form A, SPST30 VDC @ 16 A or 250 VAC @ 16 A
Accuracy ±5% of measured value±5% RH, Non-condensing±0.6°C± 10% of FSR.
Response Time 1 seconds30 seconds
Powered from Terminal Block +12 ~ +48 VDC
Protocol DCON and Modbus/RTU (RS-485)Modbus TCP(Ethernet, Wi-Fi) and MQTT(Ethernet)
Mode Infrastructure & Limited AP
Ingress Protection Rating IP20
Antenna 1 dBi (PCB Antenna)
RX Sensitivity 95.7 dBm @ 1 DSSS, -74.0 dBm @ 54 OFDM
Transmission Distance (LoS) 50 meters (LOS)
Output Power 18 dBm @ 1 DSSS, 14.5 dBm @ 54 OFDM
Security IP filter (whitelist) and Password (web)
Standard Supported IEEE 802.11 b/g/n
Data Logger Yes, up to 450,000 records
Life Time 10 years5 years, Customer has to replace the filter patch.5 years
Warm-up Time 5 minutes20 seconds
Sizes 0.3μm, 0.5μm, 1μm, 2.5μm, 5μm, 10μm

Air Quality Multisensor

This multisensor simultaneously measures CO, PM1/PM2.5/PM10, temperature and relative humidity. It is suitable for monitoring indoor climate and air quality in offices, industrial facilities and public buildings.


CO 0-1000 ppm · PM 0-1000 ug/m3 · Wi-Fi and RS-485 · Data logger 450,000 records


Features and Benefits

  • Multiple sensors in one - measures CO, particulates, temperature and humidity simultaneously
  • Data logger - stores up to 450,000 records for historical analysis
  • Flexible communication - supports Wi-Fi, Ethernet and RS-485
  • Alarm functions - triggers alarms for PM, CO, RH and temperature thresholds
  • Built-in security - IP whitelist and password protected web access


Applications

The sensor is designed for fixed ceiling or wall mounting where continuous air quality monitoring is required.

  • Indoor climate monitoring in offices
  • Industrial air quality measurement
  • Public buildings and schools
  • Ventilation control based on measurements


A complete solution for accurate and reliable monitoring of air quality and climate.