Item number PIR-OCCUP-SENSO-TEMPE-2

PIR Occupancy Sensor with Temperature, Humidity, Wi-Fi and PoE

PIR motion detection, 360 field of view
Detection height 4m, range 8m diameter
Temperature range -40 to 120C, 0.01C res.
Humidity 0-100% RH, 0.01% RH resolution
Wi-Fi IEEE 802.11 b/g/n, WEP/WPA/WPA2
1 x RS-485, 1 x Ethernet/PoE
Protocols: DCON, Modbus RTU/TCP, MQTT
1 x wet contact input, 1 x relay output
Fire alarm trigger at 65C, programmable
18-48VDC, PoE, 3W consumption
150 x 53 mm (Dia x H), IP20
0 to 35C operating (special components required)

265.32 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation Ceiling /surface mounted
Type Power Relay, Form CWet Contact
Operating Temperature 0 ~ +35°C
Resolution 0.01% RH0.01°C
Range 0 ~ 100% RH40 ~ +120°C
Encryption WEP, WPA ,WPA2
Status Yes, 1 as Power/Communication Indicator. 1 as Alarm Indicator
Ports 1 x RS-4851 x Ethernet/PoE
Input Range 18 ~ 48 VDC, PoE
Consumption 3 W
Dimensions (mm) Ø150 x 53 (Ø x H)
Storage Temperature 30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV contact for each terminal, ±8 kV air for random point
Channels 21
Accuracy ±5% RH±0.5°C (at 0 ~ 60°C)
Input Impedance 68 KΩ, 1 W
ON Voltage Level 70 ~ 220 VAC
OFF Voltage Level 20 VAC Max.
Baud Rate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Protocol DCON, Modbus RTU, Modbus TCP, MQTT
Mode Infrastructure/Limited AP
Ingress Protection Rating IP20
Contact Rating NO: 10 A @ 250 VACNC: 6 A @ 250 VAC
Transmission Distance (LoS) 50 m (LOS)
EFT (IEC 61000-4-4) ±4 kV for Power Line
Standard Supported Wi-Fi: IEEE 802.11 b/g/n
Detection Height 4 m Max.
Detection Field of View 360°; 8 m Diameter Max.
Lux Control Level Hardware: 2 modes (Dawn and dust) / Software: 5-step
Delay Time Hardware: 8-step Switch-selectable (seconds): 6, 16, 33, 66, 131, 262, 524, 1049Software: 16-step (seconds): 2, 4, 6, 8, 16, 33, 49, 66, 131, 262, 393, 524, 1049, 2097, 3146, 4194
PIR Response Time 1 second
Fire Alarm 65°C (Programmable)

PIR Occupancy Sensor

This PIR occupancy sensor combines motion detection with temperature and humidity measurement in a single ceiling mounted unit. It is designed for intelligent lighting control and environmental monitoring in commercial and industrial buildings. With Wi-Fi and PoE connectivity, it integrates easily into existing network infrastructure.


360° detection · Temperature & humidity · Wi-Fi & PoE · RS-485/Modbus


Features that make it a flexible choice

  • PIR detection - senses motion up to 8 m diameter and 4 m height
  • Temperature and humidity sensing - high accuracy with 0.01°C and 0.01% RH resolution
  • Flexible connectivity - supports RS-485, Ethernet/PoE and Wi-Fi
  • Adjustable lighting control - hardware and software controlled dimming levels
  • Fire alarm function - programmable trigger at 65°C


Applications for smart building control

The sensor suits applications where motion, temperature and humidity need to be monitored together to optimize energy use and comfort.

  • Automatic lighting control in offices and corridors
  • Indoor climate monitoring in commercial buildings
  • Occupancy based HVAC control
  • Integration into BMS via Modbus or MQTT


A versatile sensor solution for those who need precise detection and seamless network integration in a single device.