There are 33 products.
Load cell for measuring torque. Rotating with wireless transfer to base. Voltage, frequency or USB

Load Cell for measuring torque on axle
can sit between power source and load
suitable for measuring electric cars etc.
capacity from 100Nm to 10kNm
simultaneous voltage and frequency on the output
Option with digital output via USB
Order required max. power and output format

Call +45 56 66 20 20 for price
Item numberLC-AXIAL-TQ
On the way in
Portable road cell instrument for strain gauge input. Multi-point calibration

Sovereign Linearity Specifications
Excitation Voltage: 3.3Volt
Resolution: 24bit
% FS: 0.0002
Measurement speed up to 2400 samples per. Second
High internal resolution (up to 500,000 Counts)
IP67 Searched cabinet
Battery powered (long battery life)
128 x 64 Graphic screen with backlight
More display modes (Peak / bottom, Delta, Live , gross and net)
logging and graphing for PC (software is included)
support Ted's template 33, 40 and 41
Live calibration and multi-point calibration
Dim: 170 x 94 x 42 mm
Weight: 330 grams

1,880.96 €
Item numberINST-LOADCELL-PSD
On the way in
Port table Load Cell - load cell instrument. 4 Wire Strain Gauge input.

Handheld 7-digit LCD screen
4 Wire Full Bridge input
with Peak, Trough, Net, Overload and Shunt Cal Indication
Battery operation of 450 hours in power saving mode
Keys for ON / OFF , Interval Selection, Peak / Valley Hold and Gross / Net
Single Calibration (Direct mV/V) with double range for values ​​such as kg and lb
Weighing only 250 grams
IP65 / NEMA4
TEDs Enabled to automatic Sensor calibration (IEEE1451 - Template 33)
Buy Leather case
Battery: 2 x AA

1,146.24 €
Item numberINST-LOADCELL-HH
On the way in
Vejecelle - Strain Gauge datalogger op til 6-wire, 16bit, 4MB hukommelse, 20ms sampling tid, Batteridrift, USB

16-bit strain gauge / weighing bridge amplifier - datalogger
With temperature compensation
Excitation sense 2.5VDC
Bridge input: +/- 8mV Version: 16mV and 32mV
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc.: Software to configure, download, plotting, analysis and an alarm (not supplied)
Configurable alarm controls
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion

1,167.94 €
Item numberLOG-MIBG
On the way in
SGA/D Strain Gauge Amplifier - Signal Conditioner IP65

Strain gauge signal conditioner

DC powered version (SGA/D)

18 to 24 V DC input

Isolated PSU option: 9 to 36 V DC

90 mA typical current draw

Bridge excitation: 5 V and 10 V

Bridge sensitivity: 0.06 to 30 mV/V

Bandwidth DC to 6000 Hz

Filter cut-off: 1 to 5000 Hz

Outputs: +-10V, +-5V, 0-10V, 0-5V

Outputs: 0-20 mA, 4-20 mA

IP67 ABS case, 3 x M16 glands

-10 to 50 degrees C operating

164 x 84 x 57 mm

487.76 €
Item numberSGA/D
On the way in
Vejeforstærker med RS232 udgforLoad Cells

Præcisions-vejeforstærker med RS232-udgang

454.53 €
Item numberSGA232
On the way in
Load cell 100 kg

S-type load cell
impedance input: 410 ohm
Iimpedance output: 350 ohms
Exitation: 10 - 15V
4-wire
Thread in top and bottom: M8 x 1 , 25 mM
Full load = 100kg
Overload: max. 150%

Call +45 56 66 20 20 for price
Item numberBAB100
On the way in
Vejeforstærker med RS232 udgforLoad Cells

Vejeforstærker med RS232-udgang, standardversion

268.40 €
Item numberSGA232S
On the way in
Vejeforstærker (AC forsyning)forLoad Cells

Vejeforstærker til forsyning med 110/220/240 VAC eller med 24 VDC

655.53 €
Item numberSGA/A
On the way in
Load Cell Weight Indicator with 10,000 Display Resolution

Load cell excitation: 12VDC +/-5%
Up to 8 x 350 ohm load cells
A/D resolution: 100,000 counts
Display resolution: 10,000
A/D conversion rate: 70 times/sec
Input sensitivity: 0.6-120 uV/D
Non-linearity: 0.01% of full scale
Full digital span calibration
Operating temp: -5 to +40C
Weight approx. 4.0 kg
Power: 100/110/220/240V, 50/60 Hz
250 x 210 x 131 mm

402.00 €
Item numberIND9602
Physically in stock
Transcell DBSL 2t Pancake Load Cell - LC-DBSL-2T

Pancake type load cell

Capacity: 2t

On order capacities: 1t, 3t, 5t, 10t, 15t, 20t, 30t also available

Alloy steel, nickel-plated

Rated output: 3.0 mV/V +/-0.25%

Nonlinearity: +/-0.03% rated output

Hysteresis: +/-0.03% rated output

Safe temp: -10°C to +70°C

Compensated: -10°C to +40°C

Excitation: 10V DC/AC (max 15V)

Safe overload: 150%

Wire length: 6m or 10m

Call +45 56 66 20 20 for price
Item numberLC-DBSL-2T
On the way in
Load cell signal conditioner, Strain Gauge Signal conditioner, 2mV/V, 4-20mA 0-5V, 0-10V, 5-12VDC

Load cell amplifier with 4-20mA, 0-5V, 0-10V

2.0 mV/V ± 10% sensitivity, better than 0.1% FS accuracy.

Internal precision amplifier and conversion circuits.

DIN rail mounted

Terminal blocks.

4-20 mA current and 0-5 V, 0-10 V voltage output in one amplifier

The output signal can be selected via a push button

Can be used with all kinds of strain gauge bridge load cells such as weighing, tension, compression, torque, etc.

Dimensions: 115 x 58 x 37

Temperature: -10 - +50°C

81.07 €
Item numberSGA/GT-A
On the way in
Restlager: 300 kg Single Point vejecelleforSurplus / DEMO PRODUCTS

Transtronic FAE300

Vejecelle for træk og tryk. Tåler 50% overbelastning uden varig skade

151.42 €
Item numberFAE300
Physically in stock
Showing 21-33 of 33 item(s)