Item number IND9602
Weighing Indicator GST-9602, 10,000 Display Resolution, 12 VDC Load Cell Excitation, Panel Mount
Load cell excitation: 12VDC +/-5%
Up to 8 x 350 ohm load cells
A/D resolution: 100,000 counts
Display resolution: 10,000
A/D conversion rate: 70 times/sec
Input sensitivity: 0.6-120 uV/D
Non-linearity: 0.01% of full scale
Full digital span calibration
Operating temp: -5 to +40C
Weight approx. 4.0 kg
Power: 100/110/220/240V, 50/60 Hz
250 x 210 x 131 mm
402.00 €
Excl. VAT
Quantity
Physically in stock
Specifications
| Operating Temp. | -5°C to +40°C |
|---|---|
| Indgangsimpedans | 10 MΩ |
| Luftfugtighed | Max. 95% RH (non-condensing) |
| Montering | Panelmontering |
| Strømforsyning | 100, 110, 220 or 240 VAC, 50/60 Hz (factory set) |
| Weight | Approx. 4.0 kg |
| Dimensioner | 250 x 210 x 131 mm (W x D x H) |
| Temperature Coefficient | Zero: ±(0.2 µV ±0.0008% of initial offset voltage)/°C; span: ±5 ppm/°C of reading |
| Excitation Voltage | 12 VDC ±5% (load cell excitation) |
| Model | GST-9602 |
| Number of load cells | Max. 8 load cells of 350 Ω each (load current max. 80 mA) |
| Input sensitivity | 0.6 µV/D to 120 µV/D |
| Zero adjustment | 0.35 mV to 24 mV |
| Span adjustment | Full digital calibration |
| Display resolution | 10,000 divisions |
| A/D resolution | 100,000 counts |
| A/D conversion rate | 70 times/sec. |
| A/D conversion method | 3-phase tare, integrating dual-slope |
| Under-zero indication | Displays "---" |
| Non-linearity | +0.01% of full scale |
| Panel cutout | 232 (+1.0/-0) x 121 (+0.8) mm (W x H) |
Panel-Mount Load Cell Indicator for Weighing Systems
This panel-mount digital load cell indicator reads and displays the signal from strain-gauge load cells in weighing and force measurement systems. It suits system integrators who need a stable, accurate readout built into a control panel or machine front.
Powers Up to Eight Load Cells
The built-in 12 VDC excitation supply can drive up to eight 350 ohm load cells, with a maximum load current of 80 mA. This allows multi-cell platforms, tanks and hoppers to be connected to one indicator without an external excitation supply. The input sensitivity range of 0.6 to 120 uV per display division covers both low-output and high-output cells.
Fast, Fine-Resolution Signal Conversion
The dual-slope integrating A/D converter resolves 100,000 counts and updates 70 times per second, so the display follows load changes closely. The display resolution is 10,000, and non-linearity is within 0.01% of full scale. Calibration is fully digital, so no potentiometers need to be adjusted, and the wide zero adjustment range compensates for the dead load of a hopper or platform.
Panel Installation and Mains Supply
The indicator mounts in a standard panel cutout. The mains voltage (100, 110, 220 or 240 V AC, 50/60 Hz) is set at the factory, so specify it when ordering.
Other products in the same category:
Strain Gauge Amplifier Signal Conditioner - Digital Version, 4x 350 Ohm Bridge Excitation, Selectable Analogue Output, IP65
Strain gauge signal conditioner
DC powered version (SGA/D)
18 to 24 V DC input
Isolated PSU option: 9 to 36 V DC
90 mA typical current draw
Bridge excitation: 5 V and 10 V
Bridge sensitivity: 0.06 to 30 mV/V
Bandwidth DC to 6000 Hz
Filter cut-off: 1 to 5000 Hz
Outputs: +-10V, +-5V, 0-10V, 0-5V
Outputs: 0-20 mA, 4-20 mA
IP67 ABS case, 3 x M16 glands
-10 to 50 degrees C operating
164 x 84 x 57 mm
487.76 €
Item number:SGA/D
Programmable Load Cell Instrument and controller, LCD Display, Connection up to 16 Load Cell, IP66 NMEA 4X
Top-class weighing instrument from Interface
LCD screen, W x H - 117 x 86 mm
Display up to four channel channels per screenshot
With required Legal for Trade information
32 scale accumulations
Millivolt calibration, 5-point linearization and geographic calibration
NEMA Type 4X / IP66 stainless steel enclosure
Selectable A/D with measurement speed up to 960/second
100 set points, 30 configurable
64K uses built-in Non-V RAM
Power for 16, 350 ohm load cells per A / D card
Peak team
Call +45 56 66 20 20 for price
Item number:LC-920I-UNI
Portable load cell instrument. 4 Wire Strain Gauge input. Single pass calibration, direct, mV/V with TEDs
Handheld 7-digit LCD screen
4 Wire Full Bridge input
with Peak, Trough, Net, Overload and Shunt Cal Indication
Battery operation of 450 hours in power saving mode
Keys for ON / OFF , Interval Selection, Peak / Valley Hold and Gross / Net
Single Calibration (Direct mV/V) with double range for values such as kg and lb
Weighing only 250 grams
IP65 / NEMA4
TEDs Enabled to automatic Sensor calibration (IEEE1451 - Template 33)
Buy Leather case
Battery: 2 x AA
1,146.24 €
Item number:INST-LOADCELL-HH
Portable load cell instrument for strain gauge input. Multi-point calibration, direct, mV/V. Logging and graphing. With TEDs
Sovereign Linearity Specifications
Excitation Voltage: 3.3Volt
Resolution: 24bit
% FS: 0.0002
Measurement speed up to 2400 samples per. Second
High internal resolution (up to 500,000 Counts)
IP67 Searched cabinet
Battery powered (long battery life)
128 x 64 Graphic screen with backlight
More display modes (Peak / bottom, Delta, Live , gross and net)
logging and graphing for PC (software is included)
support Ted's template 33, 40 and 41
Live calibration and multi-point calibration
Dim: 170 x 94 x 42 mm
Weight: 330 grams
1,880.96 €
Item number:INST-LOADCELL-PSD








